50x50 bottom left
johslarsen·100x100_protoboard
About the 50x50 bottom left PCB
50x50 bottom left is an open source PCB design by johslarsen, published on GitHub. It is a 2-layer board measuring 48.9 × 48.3 mm, with 98 components from 17 distinct parts.
Other key parts include the LM7805CT. By type, the board carries 68 connectors, 15 jumpers, 2 fuses, 2 capacitors and 1 IC.
From the project
A prototyping board for through-hole and some SMD soldering designed to be used as a whole or broken into smaller pieces
Main components on the 50x50 bottom left
50x50 bottom left bill of materials (BOM)
98 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805CT | TO-220_Neutral123_Vertical | U1 |
| 1 | BARREL_JACK | BARREL_JACK | CON1 |
| 64 | INTERCONNECT_1X03 | Interconnect_1x03 | J1, J2, J3, J4, J5, J6, J7, J8 +56 |
| 1 | INTERCONNECT_1X02 | Interconnect_1x02 | J65 |
| 1 | CONN_8X2 | Socket_Strip_Straight_2x08 | P1 |
| 1 | CONN_8X2 | Edge_2x08 | P2 |
| 2 | FUSE | CC12ZZ | F1, F2 |
| 4 | INTERCONNECT_1X16 | Interconnect_1x16 | GND1, GND3, VCC1, VDD1 |
| 2 | INTERCONNECT_1X07 | Interconnect_1x07 | GND2, GND4 |
| 9 | JUMPER | Solder_Jumper_1x2_Shorted_T | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP13 +1 |
| 1 | JUMPER | Solder_Jumper_1x2 | JP8 |
| 4 | JUMPER | Solder_Jumper_SMD_1x2_Shorted | JP9, JP10, JP11, JP12 |
| 1 | JUMPER | Solder_Jumper_SMD_1x2 | JP15 |
| 2 | CONN_2 | Socket_Strip_Straight_1x02 | VIN1, VIN_78XX1 |
| 2 | CONN_6 | Socket_Strip_Straight_1x06 | VIN2, VOUT_78XX1 |
| 1 | u33 | C_0805_HandSoldering | C1 |
| 1 | u1 | C_0805_HandSoldering | C2 |
50x50 bottom left design files
The KiCad project lives in the johslarsen/100x100_protoboard repository on GitHub; these links point at the commit this page was built from.
50x50 bottom left: common questions
How big is the 50x50 bottom left PCB?
The 50x50 bottom left measures 48.9 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 50x50 bottom left?
98 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the 50x50 bottom left design files?
From the johslarsen/100x100_protoboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 50x50 bottom left design in my own project?
The repository has no license, so all rights stay with johslarsen. Use it as a reference, and ask the author before reusing the design.