46 open source boards using the LM7805CT
Real designs built with the LM7805CT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
SmartSupply
ThomasVDD
169.3 × 128 mm131 parts2LCustom license96Analog and ad9958
balmerdx
97.6 × 145.1 mm215 parts4LBSD-2-Clause26ParanoiaBox
profdc9
68 × 89 mm60 parts2LNo license17Nano-Play-Board
AntonioMR
100 × 49.7 mm107 parts2LNo license12UM-TSS
cmos-droner
100 × 91 mm74 parts2LMIT4ESP32
Robotica
La-guajolota
100 × 100 mm52 parts2LMIT4AVR/Arduino
DiySolderingStation
kr4fty
50.8 × 99.1 mm69 parts2LGPL-2.03Raspberry Pi
Aussentueren
fablabnbg
162.6 × 113 mm176 parts2LGPL-3.02T41-RF-board-V012
K0RGI
100 × 100 mm225 parts4LGPL-3.01ESP8266
Wallbox board
dkonigsberg
118.8 × 86.4 mm50 parts2LCC-BY-SA-4.01Twilight switch
joseguerra3000
73 × 35.6 mm21 parts2LNo license1- schematic only · 33 parts
TrailerDiagnosticSystem
patricecouillard-code
33 partsNo license1 - schematic only · 32 parts
BombaAirsoft-ARDUINO
ObiOscar
32 partsNo license1 AVR/Arduino
Controller
Technariumas
240 × 125 mm268 parts2LApache-2.00Q-Throttle repo
DavidMFlynn
167.6 × 127 mm173 parts2LNo license0100x100 busboard
johslarsen
97.8 × 96.5 mm100 parts2LNo license0100x100 protoboard
johslarsen
97.8 × 96.5 mm100 parts2LNo license0Alimentatore
CarloMara
117.6 × 97.8 mm83 parts2LNo license0PIC
Light-Follower
pavlovicdjordje35
125.4 × 80.3 mm45 parts2LNo license0AVR/Arduino
H9uno
c3h9dx
68.6 × 53.3 mm30 parts2LNo license0AVR/Arduino
MegaAktuatorModule
Elektropioneer
130.5 × 69.5 mm28 parts2LNo license0ESP32
Patrick-Richter-Microcontroladores-2025-C1
patrickRJ20212304
50.8 × 68.6 mm28 parts2LNo license0ESP32
Camila Fernandez Microcontroladores 2025 20230111
Camsu04
50.8 × 68.6 mm28 parts2LNo license0- schematic only · 63 parts
Sla box
AvatarSD
63 partsNo license0 - schematic only · 10 parts
Elektros
iyotee
10 partsNo license0 K9HZ 100W 11band LPF-Control
DRWJSCHMIDT
100 × 100 mm150 parts4LNo license18ESP8266
Sensors
GNB-UAM
74.7 × 65.3 mm54 parts2LGPL-3.04PIC
Motordriver
ahmedsiddyq
130 × 111 mm139 parts2LNo license050x50 top left
johslarsen
48.9 × 48.3 mm99 parts2LNo license050x50 top left
johslarsen
48.9 × 48.3 mm99 parts2LNo license0Wireless Power Secondary Side
sofiamonty
40 × 26 mm11 parts2LNo license0PI Zero Controller
computergeek1507
84.8 × 88.1 mm34 parts2LCERN-OHL-1.210MUSE main 4.0.2
CTDL
96.5 × 63.5 mm21 parts4LNo license650x50 bottom left
johslarsen
48.9 × 48.3 mm98 parts2LNo license050x50 bottom left
johslarsen
48.9 × 48.3 mm98 parts2LNo license0AVR/Arduino
Line interface
Technariumas
52 × 49 mm31 parts2LApache-2.00
How designs wire the LM7805CT
Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the LM7805CT connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 5V on 23 of 30 designs (a signal on 7).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 90% | — |
| OUTpin 3 | Connected to: 5V 77% · a signal 23% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SmartSupply by ThomasVDD, T41-RF-board-V012.8 by DRWJSCHMIDT, Analog and ad9958 by balmerdx and K9HZ 100W 11band LPF-Control by DRWJSCHMIDT.
The LM7805CT in open source designs
The gallery holds 46 open source boards using the LM7805CT from 34 GitHub repositories; a typical one measures about 97.7 × 87.3 mm and carries around 62 components.
79% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is SmartSupply by ThomasVDD.
Parts used alongside the LM7805CT
Microcontrollers on boards using the LM7805CT
What boards using the LM7805CT are built for
LM7805CT: common questions
Where can I find a LM7805CT reference design?
Each of the 46 boards on this page is a real design using the LM7805CT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM7805CT OUT pin connected?
The OUT pin is tied to 5V on 23 of 30 designs (a signal on 7). Counted from the KiCad layouts of 30 open source designs using the LM7805CT.
What parts are used alongside the LM7805CT?
The 40106, 74HC237, AD7991YRJZ, AD8307 and CD74HC4514M96 appear in the most repositories here.
Which microcontrollers do boards using the LM7805CT use?
Most are built on AVR/Arduino (7), ESP32 (6), ESP8266 (2) and PIC (2).
How big is a typical board using the LM7805CT?
The median is 97.7 × 87.3 mm, and 79% are two-layer designs.
What is the most popular open source board using the LM7805CT?
By GitHub stars, SmartSupply by ThomasVDD, with 96 stars.
Can I simulate one of these boards using the LM7805CT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.