18V Tomography Board
About the 18V Tomography Board
18V Tomography Board is an open source PCB design by Jolt8, published on GitHub. It is a 2-layer board measuring 61 × 149.5 mm, with 18 components from 5 distinct parts.
Other key parts include the HV2707T-C/R8X and SN74AHCT125DRG4. By type, the board carries 16 connectors and 2 ICs.
From the project
This is a repo for all the pieces of code I've written while learning chemical engineering.
This is a repo for all the pieces of code I've written while learning chemical engineering.
Many of my python projects are quite old as I have switched to Julia.
The only thing I haven't ported to Julia from python is my old and incomplete process simulator and my MESH distillation solver.
Most of the work I've done recently has revolved around solving ODEs, PDEs in Julia as well as working ModelingToolkit.jl
Main components on the 18V Tomography Board
18V Tomography Board bill of materials (BOM)
18 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HV2707T-C/R8X | LQFP48_R8_MCH | U1 |
| 1 | SN74AHCT125DRG4 HV2707T-C/R8X | LQFP48_R8_MCH | U2 |
| 1 | C496551 CONREVSMA001-G | COAX4GND_CONREVSMA001-G_TEC | J1 |
| 1 | PIMORONI_PICO_LIPO_2_XL_W CONREVSMA001-G | COAX4GND_CONREVSMA001-G_TEC | J2 |
| 14 | CONREVSMA001-G | COAX4GND_CONREVSMA001-G_TEC | J3, J4, J5, J6, J7, J8, J9, J10 +6 |
18V Tomography Board design files
The KiCad project lives in the Jolt8/Projects-And-Code-Will-Martin repository on GitHub; these links point at the commit this page was built from.
18V Tomography Board: common questions
How big is the 18V Tomography Board?
The 18V Tomography Board measures 61 × 149.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 18V Tomography Board?
18 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 18V Tomography Board design files?
From the Jolt8/Projects-And-Code-Will-Martin repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 18V Tomography Board design in my own project?
The repository has no license, so all rights stay with Jolt8. Use it as a reference, and ask the author before reusing the design.
