Tonemender2
About the Tonemender2 PCB
Tonemender2 is an open source PCB design by jonronen, published on GitHub. It is a 2-layer board measuring 91.8 × 54.1 mm, with 38 components from 24 distinct parts.
Other key parts include the OPA1612 and OEP30W-Module. By type, the board carries 14 capacitors, 9 resistors, 7 connectors, 2 ICs and 2 switches.
Main components on the Tonemender2
Tonemender2 bill of materials (BOM)
38 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPA1612 | PDIP-8 | U1 |
| 1 | OEP30W-Module | OEP30W | U2 |
| 2 | JACK_STEREO | audio_635mm_stereo_input | J1, J4 |
| 3 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2, J3, J5 |
| 2 | CONN_01X01 | PinHeader_1x01_P2.54mm_Vertical | P1, P2 |
| 2 | 500K | Potentiometer_Alps_RK163_Single_Horizontal | RV1, RV2 |
| 1 | 50K | Potentiometer_Alps_RK163_Single_Horizontal | RV3 |
| 1 | 10K | Potentiometer_Alps_RK163_Single_Horizontal | RV4 |
| 2 | SW_DPST_x2 | PinHeader_2x02_P2.54mm_Vertical | SW1, SW2 |
| 2 | 1uF | C_Radial_D6.3mm_H5.0mm_P2.50mm | C1, C12 |
| 2 | 80pF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C2, C6 |
| 1 | 47nF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C3 |
| 2 | 10nF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C4, C7 |
| 1 | 150pF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C5 |
| 1 | 22nF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C8 |
| 2 | 47uF | C_Radial_D6.3mm_H5.0mm_P2.50mm | C9, C11 |
| 1 | 47pF (optional) | C_Rect_L4.0mm_W2.5mm_P2.50mm | C10 |
| 2 | 100uF | C_Radial_D6.3mm_H7.0mm_P2.50mm | C13, C14 |
| 3 | 1M | C_Rect_L4.0mm_W2.5mm_P2.50mm | R1, R3, R6 |
| 1 | 200K | C_Rect_L4.0mm_W2.5mm_P2.50mm | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7K | C_Rect_L4.0mm_W2.5mm_P2.50mm | R4 |
| 1 | 620R | C_Rect_L4.0mm_W2.5mm_P2.50mm | R5 |
| 2 | 100K | C_Rect_L4.0mm_W2.5mm_P2.50mm | R7, R8 |
| 1 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
Tonemender2 design files
The KiCad project lives in the jonronen/kicad-stuff repository on GitHub; these links point at the commit this page was built from.
Tonemender2: common questions
How big is the Tonemender2 PCB?
The Tonemender2 measures 91.8 × 54.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tonemender2?
38 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tonemender2 design files?
From the jonronen/kicad-stuff repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Tonemender2 design in my own project?
The repository has no license, so all rights stay with jonronen. Use it as a reference, and ask the author before reusing the design.
More boards in kicad-stuff
AVR/ArduinoMill music
87.1 × 51.3 mm51 parts2LNo license1
Tube like preamp
75.2 × 50.4 mm47 parts2LNo license1
Pwm tl494cn
63.5 × 45.5 mm39 parts2LNo license1
Pseudo reverb
61 × 43.2 mm28 parts2LNo license1
Plus minus 12v
128.3 × 47.6 mm28 parts2LNo license1
Tonemender
90.8 × 38.1 mm27 parts2LNo license1
Raspi audio
53.3 × 44.7 mm27 parts2LNo license1
Mic preamp
64 × 36.1 mm27 parts2LNo license1
Generator
76.5 × 21.3 mm20 parts2LNo license1
Rgb led
53.8 × 29.8 mm16 parts2LNo license1