HardLabs

Heavenly Plunderer

JonyBepary·secure-hid·hardware/heavenly-plunderer/heavenly_plunderer.kicad_pcb

Heavenly Plunderer PCB layout, top view — open source board by JonyBepary

About the Heavenly Plunderer PCB

Heavenly Plunderer is an open source PCB design by JonyBepary, published on GitHub under the MIT license. It is a 2-layer board measuring 304 × 94 mm, with 139 components from 9 distinct parts.

By type, the board carries 67 diodes and 4 switches.

It belongs with the iot & wireless designs in this gallery.

From the project

SecureHID combines blockchain and post-quantum cryptography to secure HID communication against device impersonation, tampering, and MITM attacks. It provides decentralized device verification, dynamic encryption, quantum-resistant key management, hardware-based trust, and auditable security for USB, Bluetooth, and PS/2 devices.

- PCB: gerber/ → zip and upload to JLCPCB (spec: 1.6 mm, ENIG, matte black solder mask). Or regenerate from KiCad. - Plate: laser-cut cad/heavenly-plunderer-plate.dxf. Dimensions annotated in heavenly-plunderer-plate-dimensions.png. Tolerance ±0.1 mm for MX. - Case: 3D-print heavenlyplunderer.step or source-inject from cad/.par. Solid Edge exports are STEP AP214 for portability. - Exports: full guide in FABRICATION.md.

Heavenly Plunderer bill of materials (BOM)

139 components, 9 distinct parts.

QtyPartRefs
1
MX_SW_HS
JMX1
58
MX_SW_HS
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +50
2
MX_SW_HS
MX16, MX29
2
MX_SW_HS
MX31, MX56
5
MX_SW_HS
MX59, MX60, MX61, MX63, MX64
2
MX_stab
S1, S2
1
MX_stab
S3
1
MX_stab
S4
67
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +59

Heavenly Plunderer design files

The KiCad project lives in the JonyBepary/secure-hid repository on GitHub; these links point at the commit this page was built from.

Heavenly Plunderer: common questions

How big is the Heavenly Plunderer PCB?

The Heavenly Plunderer measures 304 × 94 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Heavenly Plunderer?

139 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Heavenly Plunderer design files?

From the JonyBepary/secure-hid repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Heavenly Plunderer design in my own project?

Yes, under the terms of its MIT license, which JonyBepary chose for the repository.

More boards in secure-hid

Similar boards