Stm32l0 mod source

JordanAceto·stm32l0_mod_source·kicad_6/stm32l0_mod_source.kicad_pcb

Stm32l0 mod source PCB layout, top view — open source STM32 board by JordanAceto

About the Stm32l0 mod source PCB

Stm32l0 mod source is an open source STM32 PCB design by JordanAceto, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 27.9 × 17.8 mm, with 17 components from 11 distinct parts.

Its main chip is the STM32L031F4PX, from the STM32 family. Other key parts include the MCP4822. By type, the board carries 10 capacitors, 3 connectors, 2 ICs, 1 inductor and 1 resistor.

It belongs with the audio designs in this gallery.

From the project

Tiny STM32 configurable LFO/ADSR/etc pcb

Task | Status | ---------|--------------| Schematic capture | ☑ PCB layout | ☑ Test build | ☑ Safe to order boards| ☑

Stm32l0 mod source, from the project README
From the project README

Main components on the Stm32l0 mod source

STM32L031F4PXMCP4822

Stm32l0 mod source bill of materials (BOM)

17 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32L031F4PX
STM32L031F4Px
U1
1
MCP4822
U2
1
inputs
J1
1
signal_outputs
J2
1
SWD_header
J3
1
100R @ 100MHz
FB1
2
2U2
2u2
C1, C5
5
100N
100n
C2, C3, C4, C6, C8
1
10U
10u
C7
2
1u
C9, C10
1
10K
10k
R1

Stm32l0 mod source design files

The KiCad project lives in the JordanAceto/stm32l0_mod_source repository on GitHub; these links point at the commit this page was built from.

Stm32l0 mod source: common questions

What microcontroller does the Stm32l0 mod source use?

The Stm32l0 mod source is built around the STM32L031F4PX, from the STM32 family.

How big is the Stm32l0 mod source PCB?

The Stm32l0 mod source measures 27.9 × 17.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Stm32l0 mod source?

17 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32l0 mod source design files?

From the JordanAceto/stm32l0_mod_source repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stm32l0 mod source design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which JordanAceto chose for the repository.

Can I test firmware for the Stm32l0 mod source without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards