35 open source boards using the MCP4822

Real designs built with the MCP4822, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

35 boardsClear filters|Most starred

How designs wire the MCP4822

Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the MCP4822 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 18 of 26 designs, most often 100 nF (then 10 µF).
  • The LDAC pin is tied to GND on 18 of 26 designs (a signal on 8).
  • The VB pin has a series resistor on 15 of 26 designs, most often 1 kΩ (then 220 Ω).
  • The VA pin has a series resistor on 13 of 26 designs, most often 1 kΩ (then 10 kΩ).
VDDpin 1Connected to: 5V 85% · a signal 15%
  • Decoupling capacitor on 69% · 100 nF (15), 10 µF (4), 4.7 µF (1)
LDACpin 5Connected to: GND 69% · a signal 31%
VBpin 6Connected to: Signal 96%
  • Series resistor on 58% · 1 kΩ (4), 220 Ω (2), 10 kΩ (1)
VSSpin 7Connected to: GND 96%
VApin 8Connected to: Signal 100%
  • Series resistor on 50% · 1 kΩ (3), 10 kΩ (1), 24 kΩ (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pslab hardware by fossasia, Brain core by shmoergh, Kicad cpu board by matthewcieplak and Zoxnoxious Backplane and VCA by brer-rabbit.

The MCP4822 in open source designs

The gallery holds 35 open source boards using the MCP4822 from 27 GitHub repositories; a typical one measures about 93.8 × 100 mm and carries around 91 components.

85% are two-layer designs, the rest use four layers or more, and 34% carry an open source license.

The most starred is Pslab hardware by fossasia.

Microcontrollers on boards using the MCP4822

MCP4822: common questions

Where can I find a MCP4822 reference design?

Each of the 35 boards on this page is a real design using the MCP4822. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP4822 VDD pin?

The VDD pin has a decoupling capacitor on 18 of 26 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 27 open source designs using the MCP4822.

How is the MCP4822 LDAC pin connected?

The LDAC pin is tied to GND on 18 of 26 designs (a signal on 8). Counted from the KiCad layouts of 27 open source designs using the MCP4822.

What resistor goes on the MCP4822 VB pin?

The VB pin has a series resistor on 15 of 26 designs, most often 1 kΩ (then 220 Ω). Counted from the KiCad layouts of 27 open source designs using the MCP4822.

What parts are used alongside the MCP4822?

The TL072, MCP6004, TL074, 6N138 and AMS1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the MCP4822 use?

Most are built on RP2040/RP2350 (9), AVR/Arduino (7), STM32 (6) and PIC (2).

How big is a typical board using the MCP4822?

The median is 93.8 × 100 mm, and 85% are two-layer designs.

What is the most popular open source board using the MCP4822?

By GitHub stars, Pslab hardware by fossasia, with 1,700 stars.

Can I simulate one of these boards using the MCP4822 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part