ProjectSoloJam

JosephFiddes·ProjectSoloJam·Controller/Controller PCB Files/Controller PCB Files.kicad_pcb

ProjectSoloJam PCB layout, top view — open source board by JosephFiddes

About the ProjectSoloJam PCB

ProjectSoloJam is an open source PCB design by JosephFiddes, published on GitHub. It is a 4-layer board measuring 245 × 180 mm, with 96 components from 7 distinct parts.

Other key parts include the CD4053B. By type, the board carries 40 resistors, 16 switches, 16 capacitors, 8 ICs and 8 diodes.

From the project

Files and info for my solo jam project.

Physical controller to send commands to REAPER, via Open Sound Control. The controller can toggle recording, change track volumes, and set record arming for tracks.

A template REAPER project set up for the controller is found under SoloJamTemplate/SoloJamTemplate.rpp.

Place four of Corner Washer Thing 1 on the piece of wood, and then place the PCB on top, such that the washers are going through the PCB's four corner holes (note: the top-left corner hole is underneath the Arduino UNO - see the image above).

ProjectSoloJam, from the project README
From the project README

Main components on the ProjectSoloJam

ProjectSoloJam bill of materials (BOM)

96 components, 7 distinct parts.

QtyPartRefs
8
CD4053B
U1, U2, U3, U4, U5, U6, U7, U8
8
R_Fader
RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8
16
SW_Push
SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 +8
8
LED
D0, D1, D2, D3, D4, D5, D6, D7
16
1u
C1, C2, C3, C4, C5, C6, C7, C8 +8
16
100
R1, R3, R5, R7, R9, R11, R13, R15 +8
24
10k
R2, R4, R6, R8, R10, R12, R14, R16 +16

ProjectSoloJam design files

The KiCad project lives in the JosephFiddes/ProjectSoloJam repository on GitHub; these links point at the commit this page was built from.

ProjectSoloJam: common questions

How big is the ProjectSoloJam PCB?

The ProjectSoloJam measures 245 × 180 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the ProjectSoloJam?

96 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the ProjectSoloJam design files?

From the JosephFiddes/ProjectSoloJam repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ProjectSoloJam design in my own project?

The repository has no license, so all rights stay with JosephFiddes. Use it as a reference, and ask the author before reusing the design.