Virtual-Temperature-Monitoring-PCB-Design

JoshuaSavunth·Virtual-Temperature-Monitoring-PCB-Design·Virtual_Temperature_Monitoring_PCB/Virtual_Temperature_Monitoring_PCB.kicad_pcb

Virtual-Temperature-Monitoring-PCB-Design layout, top view — open source STM32 board by JoshuaSavunth

About the Virtual-Temperature-Monitoring-PCB-Design

Virtual-Temperature-Monitoring-PCB-Design is an open source STM32 PCB design by JoshuaSavunth, published on GitHub. It is a 2-layer board measuring 137 × 83 mm, with 11 components from 7 distinct parts.

Its main chip is the STM32G431CBUX, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 capacitors, 2 ICs, 2 connectors and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

A computer-based design of a temperature-monitoring PCB using an STM32G431CBUx microcontroller.

A computer-based design of a temperature-monitoring PCB using an STM32G431CBUx microcontroller.

The project covers the design process from schematic capture and analog signal conditioning through SPICE simulation, PCB layout, firmware development, and manufacturing-file generation.

The system models a temperature sensor with a linear output of:

This gives a sensor output of 0 V at 0 °C and 2.0 V at 100 °C.

Virtual-Temperature-Monitoring-PCB-Design, from the project README
From the project README

Main components on the Virtual-Temperature-Monitoring-PCB-Design

Virtual-Temperature-Monitoring-PCB-Design bill of materials (BOM)

11 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G431CBUX
STM32G431CBUx
U1
1
AMS1117-3.3
U2
1
CONN_01X03_PIN
Conn_01x03_Pin
J1
1
CONN_01X02_PIN
Conn_01x02_Pin
J2
4
100N
100n
C1, C4, C5, C6
2
10U
10u
C2, C3
1
1k
R1

Virtual-Temperature-Monitoring-PCB-Design design files

The KiCad project lives in the JoshuaSavunth/Virtual-Temperature-Monitoring-PCB-Design repository on GitHub; these links point at the commit this page was built from.

Virtual-Temperature-Monitoring-PCB-Design: common questions

What microcontroller does the Virtual-Temperature-Monitoring-PCB-Design use?

The Virtual-Temperature-Monitoring-PCB-Design is built around the STM32G431CBUX, from the STM32 family.

How big is the Virtual-Temperature-Monitoring-PCB-Design?

The Virtual-Temperature-Monitoring-PCB-Design measures 137 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Virtual-Temperature-Monitoring-PCB-Design?

11 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Virtual-Temperature-Monitoring-PCB-Design design files?

From the JoshuaSavunth/Virtual-Temperature-Monitoring-PCB-Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Virtual-Temperature-Monitoring-PCB-Design design in my own project?

The repository has no license, so all rights stay with JoshuaSavunth. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Virtual-Temperature-Monitoring-PCB-Design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards