31 open source boards using the STM32G431CBUx

Real designs built with the STM32G431CBUx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

31 boardsClear filters|Most starred

How designs wire the STM32G431CBUx

Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the STM32G431CBUx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 21 of 25 designs, most often 100 nF (then 1 µF).
  • The VBAT pin has a decoupling capacitor on 20 of 25 designs, most often 100 nF (then 1 µF).
  • The VREF+ pin has a decoupling capacitor on 18 of 25 designs, most often 100 nF (then 1 µF).
  • The VDDA pin has a decoupling capacitor on 18 of 25 designs, most often 100 nF (then 1 µF).
VBATpin 1Connected to: 3.3V 84%
  • Decoupling capacitor on 80% · 100 nF (24), 1 µF (6), 4.7 µF (3)
PC14pin 3Connected to: Not connected 60% · a signal 28%
PC15pin 4Connected to: Not connected 60% · 1.8V 16% · a signal 24%
PF0pin 5Connected to: Signal 64% · not connected 24%
  • Crystal on 40% · 12 MHz (3), 24 MHz (1)
PF1pin 6Connected to: Signal 56% · not connected 32%
  • Crystal on 36% · 12 MHz (3), 24 MHz (1), 16 MHz (1)
PG10pin 7Connected to: A connector 60% · not connected 20%
  • Capacitor to GND on 56% · 100 nF (11), 470 nF (3)
  • Pull-up to 3.3V on 56% · 10 kΩ (7), 1.5 kΩ (3), 100 kΩ (1)
PA7pin 15Connected to: Signal 80% · not connected 16%
  • Series resistor on 36% · 10 kΩ (3), 1 kΩ (2), 2.2 kΩ (1)
VREF+pin 20Connected to: 3.3V 56% · a signal 40%
  • Decoupling capacitor on 72% · 100 nF (16), 1 µF (12), 4.7 µF (4)
VDDApin 21Connected to: 3.3V 72% · a signal 28%
  • Decoupling capacitor on 72% · 100 nF (21), 1 µF (10), 4.7 µF (4)
VDDpin 23, 35, 48Connected to: 3.3V 92%
  • Decoupling capacitor on 84% · 100 nF (63), 1 µF (16), 470 nF (10)
PB8pin 46Connected to: A connector 24% · not connected 20%
  • Resistor to GND on 52% · 10 kΩ (8), 1.5 kΩ (3), 5.1 kΩ (1)
VSSpin 49Connected to: GND 88%

35 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Board by pinguz97, Corevus m by calithameridi, G431 M2006 ESC by EMakerDragon and SMDUv3 by sabanekko3.

The STM32G431CBUx in open source designs

The gallery holds 31 open source boards using the STM32G431CBUx from 28 GitHub repositories; a typical one measures about 60 × 50 mm and carries around 84 components.

72% use four copper layers or more, and 45% carry an open source license.

The most starred is Board by pinguz97.

Microcontrollers on boards using the STM32G431CBUx

STM32G431CBUx: common questions

Where can I find a STM32G431CBUx reference design?

Each of the 31 boards on this page is a real design using the STM32G431CBUx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32G431CBUx VDD pin?

The VDD pins have a decoupling capacitor on 21 of 25 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 25 open source designs using the STM32G431CBUx.

What decoupling capacitors do designs use on the STM32G431CBUx VBAT pin?

The VBAT pin has a decoupling capacitor on 20 of 25 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 25 open source designs using the STM32G431CBUx.

What decoupling capacitors do designs use on the STM32G431CBUx VREF+ pin?

The VREF+ pin has a decoupling capacitor on 18 of 25 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 25 open source designs using the STM32G431CBUx.

What parts are used alongside the STM32G431CBUx?

The AMS1117-3.3, BMI323, IS21ES08G, MPM3822 and MPM3834 appear in the most repositories here.

Which microcontrollers do boards using the STM32G431CBUx use?

Most are built on STM32 (28) and FPGA (3).

How big is a typical board using the STM32G431CBUx?

The median is 60 × 50 mm, and 28% are two-layer designs.

What is the most popular open source board using the STM32G431CBUx?

By GitHub stars, Board by pinguz97, with 51 stars.

Can I simulate one of these boards using the STM32G431CBUx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part