Teach me a pid
About the Teach me a pid PCB
Teach me a pid is an open source PCB design by JQIamo, published on GitHub. It is a 4-layer board measuring 152.4 × 101.6 mm, with 119 components from 46 distinct parts.
Other key parts include the LM4040DBZ-5, INA849, OPA189, BUF634A and LM2940CS-12/NOPB. By type, the board carries 43 capacitors, 36 resistors, 16 ICs, 10 switches, 6 connectors and 1 diode.
From the project
Simplified schematic of a PID controller
Main components on the Teach me a pid
Teach me a pid bill of materials (BOM)
119 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM4040DBZ-5 | SOT-23 | U1, U2 |
| 2 | INA849 | SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 7 | OPA189 | SOIC-8_3.9x4.9mm_P1.27mm | U5, U6, U7, U9, U10, U11, U12 |
| 2 | BUF634A | TI_SO-PowerPAD-8_ThermalVias | U8, U13 |
| 1 | LM2940CS-12/NOPB | TO-263-3_TabPin2 | U14 |
| 1 | LM2990SX-12 | TO-263-3_TabPin2 | U15 |
| 1 | LM317_TO-252 | TO-252-2 | U16 |
| 1 | Input A | BNC_Amphenol_031-5539_Vertical | J1 |
| 1 | Input B / Setpoint | BNC_Amphenol_031-5539_Vertical | J2 |
| 1 | Monitor | BNC_Amphenol_031-5539_Vertical | J3 |
| 1 | Output | BNC_Amphenol_031-5539_Vertical | J4 |
| 1 | SCREW_TERMINAL_01X04 Screw_Terminal_01x04 | TerminalBlock_Altech_AK300-4_P5.00mm | J5 |
| 1 | SCREW_TERMINAL_01X03 Screw_Terminal_01x03 | TerminalBlock_Altech_AK300-3_P5.00mm | J6 |
| 5 | 100K 100k | Slide_pot_45mm | RV1, RV2, RV3, RV4, RV5 |
| 1 | 10K | Potentiometer_Bourns_3296W_Vertical | RV6 |
| 1 | 2k | Potentiometer_Bourns_3296W_Vertical | RV7 |
| 5 | SW_DPDT_X2 SW_DPDT_x2 | MHS222 | SW1, SW2, SW3, SW5, SW10 |
| 5 | SW_SP4T | SLB1470 | SW4, SW6, SW7, SW8, SW9 |
| 1 | GBU4A | Diode_Bridge_Vishay_GBU | D1 |
| 1 | 100N 100nF | C_0805_2012Metric | C1 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DNP | C_0805_2012Metric | C2, C10 |
| 1 | 100P 100p | C_0805_2012Metric | C3 |
| 1 | 1n | C_0805_2012Metric | C4 |
| 1 | 10N 10n | C_0805_2012Metric | C5 |
| 1 | 1NF 10nF | C_0805_2012Metric | C6 |
| 1 | 10NF 100nF | C_0805_2012Metric | C7 |
| 1 | 100NF 1uF | C_0805_2012Metric | C8 |
| 1 | 1UF 10uF | C_0805_2012Metric | C9 |
| 1 | 100P 10p | C_0805_2012Metric | C11 |
| 1 | 100p | C_0805_2012Metric | C12 |
| 1 | 10N 1n | C_0805_2012Metric | C13 |
| 22 | 100NF 100nF | C_0805_2012Metric | C14, C15, C16, C17, C20, C21, C22, C23 +14 |
| 2 | 22MF 22mF | CP_Radial_D30.0mm_P10.00mm_SnapIn | C18, C19 |
| 3 | 10UF 10uF | C_1210_3225Metric | C24, C25, C42 |
| 2 | 220UF 220uF | CP_Elec_8x6.9 | C32, C33 |
| 1 | 22UF 22uF | CP_Elec_4x5.8 | C44 |
| 2 | 10k | R_0805_2012Metric | R1, R2 |
| 16 | 10K 10k | R_0805_2012Metric | R3, R4, R5, R6, R7, R8, R9, R10 +8 |
| 1 | 220 4.7k | R_0805_2012Metric | R14 |
| 2 | 50 | R_0805_2012Metric | R15, R23 |
| 1 | 1M | R_0805_2012Metric | R16 |
| 1 | 10M | R_0805_2012Metric | R17 |
| 7 | 1k | R_0805_2012Metric | R24, R25, R26, R27, R28, R30, R31 |
| 3 | DNP | R_0805_2012Metric | R29, R33, R34 |
| 1 | 330 | R_0805_2012Metric | R32 |
| 2 | 3.3k | R_0805_2012Metric | R35, R36 |
Teach me a pid design files
The KiCad project lives in the JQIamo/teach-me-a-pid repository on GitHub; these links point at the commit this page was built from.
Teach me a pid: common questions
How big is the Teach me a pid PCB?
The Teach me a pid measures 152.4 × 101.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Teach me a pid?
119 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Teach me a pid design files?
From the JQIamo/teach-me-a-pid repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Teach me a pid design in my own project?
The repository has no license, so all rights stay with JQIamo. Use it as a reference, and ask the author before reusing the design.