23 open source boards using the LM4040DBZ-5

Real designs built with the LM4040DBZ-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the LM4040DBZ-5

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the LM4040DBZ-5 connects to, and the resistors, capacitors and other passives placed on it.

Kpin 1Connected to: Signal 46% · GND 23% · 5V 31%
  • Capacitor to GND on 38% · 100 nF (3), 4.7 µF (1), 1 µF (1)
  • Pull-up to 12V on 38% · 10 kΩ (3), 4.7 kΩ (1), 845 Ω (1)
Apin 2Connected to: GND 54% · -5V 15% · a signal 31%
  • Series resistor on 31% · 68 kΩ (2), 2.2 kΩ (1), 82 kΩ (1)
NCpin 3Connected to: Not connected 92%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DisPhaze Components by dchwebb, Dspod module by emeb, TapeLooper MainBoard by TheSlowGrowth and Wagyu by mmalex.

The LM4040DBZ-5 in open source designs

The gallery holds 23 open source boards using the LM4040DBZ-5 from 13 GitHub repositories; a typical one measures about 68.6 × 106.5 mm and carries around 89 components.

57% use four copper layers or more, and 35% carry an open source license.

The most starred is DisPhaze Components by dchwebb.

Microcontrollers on boards using the LM4040DBZ-5

LM4040DBZ-5: common questions

Where can I find a LM4040DBZ-5 reference design?

Each of the 23 boards on this page is a real design using the LM4040DBZ-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LM4040DBZ-5?

The TL072, MCP6004, TL074, 4013 and BUF634A appear in the most repositories here.

Which microcontrollers do boards using the LM4040DBZ-5 use?

Most are built on AVR/Arduino (3), STM32 (2) and NXP (1).

How big is a typical board using the LM4040DBZ-5?

The median is 68.6 × 106.5 mm, and 43% are two-layer designs.

What is the most popular open source board using the LM4040DBZ-5?

By GitHub stars, DisPhaze Components by dchwebb, with 21 stars.

Can I simulate one of these boards using the LM4040DBZ-5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part