Wearable cape v01
jreus·wearable_cape_v01
About the Wearable cape v01 PCB
Wearable cape v01 is an open source PCB design by jreus, published on GitHub. It is a 2-layer board measuring 72.6 × 54.6 mm, with 80 components from 27 distinct parts.
Other key parts include the MCP6004, BEAGLEBONEBLACK and OKI_7805. By type, the board carries 40 resistors, 24 capacitors, 8 connectors, 4 ICs, 2 switches and 2 inductors.
It belongs with the wearables designs in this gallery.
From the project
First version of a wearable cape for the VanAbbemuseum Earthquake Archive
First version of a wearable cape for the VanAbbemuseum Earthquake Archive
- fix wiring errors on minijack outputs to amplifiers - Swap out the buffered voltage divider 1.8V reference for a fixed regulator - Add bypass capacitors to the active filters - widen power rail traces to the amplifier boards - silkscreen labels for switch functionality and outputs - breakout capability of mode switch, reset switch, & status LEDs - user leds, see: http://beaglebone.cameon.net/home/using-the-user-leds
Main components on the Wearable cape v01
Wearable cape v01 bill of materials (BOM)
80 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MCP6004 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U1, U2 |
| 1 | BEAGLEBONEBLACK | beagleboneblack_nomount | U3 |
| 1 | OKI_7805 | Socket_Strip_Angled_1x03 | U4 |
| 3 | JACK_3P | Lumberg_1503_03 | J1, J2, J3 |
| 1 | BELA_AINS | Pin_Header_Straight_1x10 | P1 |
| 1 | RECEIVER | IDC_Header_Straight_10pins | P2 |
| 1 | BATTERY | TerminalBlock_Pheonix_PT-3.5mm_2pol | P3 |
| 1 | BELA_AOUTS | Pin_Header_Straight_1x10 | P4 |
| 1 | PWR_OUT | TerminalBlock_Pheonix_MPT-2.54mm_2pol | P5 |
| 1 | SW_HALT | SW_SPST_EVQPE1 | SW1 |
| 1 | SW_MODE_SEL | SW_SPST_EVQPE1 | SW2 |
| 2 | FILTER | R_0603_HandSoldering | FB1, FB2 |
| 6 | 220pF | C_0603_HandSoldering | C1, C2, C8, C9, C14, C15 |
| 6 | 440pF | C_0603_HandSoldering | C3, C4, C10, C11, C16, C17 |
| 2 | 100nF | C_0603_HandSoldering | C5, C20 |
| 6 | 1uF | SMD-1206_Pol | C6, C7, C12, C13, C18, C19 |
| 2 | CP1 | SMD-1210_Pol | C21, C22 |
| 2 | C | C_0603_HandSoldering | C23, C24 |
| 1 | 100 | R_0603_HandSoldering | R1 |
| 1 | 120k | R_0603_HandSoldering | R2 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 68k | R_0603_HandSoldering | R3 |
| 12 | 28.7k | R_0603_HandSoldering | R4, R5, R6, R7, R8, R9, R10, R11 +4 |
| 1 | 10k | R_0603_HandSoldering | R12 |
| 6 | 2k2 | R_0603_HandSoldering | R17, R19, R21, R26, R28, R30 |
| 6 | 390 | R_0603_HandSoldering | R18, R20, R22, R27, R29, R31 |
| 6 | 3k9 | R_0603_HandSoldering | R23, R24, R25, R32, R33, R34 |
| 6 | 12k | R_0603_HandSoldering | R35, R36, R37, R38, R39, R40 |
Wearable cape v01 design files
The KiCad project lives in the jreus/wearable_cape_v01 repository on GitHub; these links point at the commit this page was built from.
- Layoutwearable_cape.kicad_pcb
Wearable cape v01: common questions
How big is the Wearable cape v01 PCB?
The Wearable cape v01 measures 72.6 × 54.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wearable cape v01?
80 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wearable cape v01 design files?
From the jreus/wearable_cape_v01 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Wearable cape v01 design in my own project?
The repository has no license, so all rights stay with jreus. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k