6 open source boards using the BEAGLEBONEBLACK
Real designs built with the BEAGLEBONEBLACK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Mems array
lfochamon
350 × 190 mm57 parts2LNo license2Wearable cape v01
jreus
72.6 × 54.6 mm80 parts2LNo license0Wearable cape v02
jreus
72.6 × 54.6 mm66 parts2LNo license0Beaglebone usbasp cape
thinnect
86.4 × 54.6 mm18 parts2LCustom license0BBB16 Expansion
computergeek1507
99.5 × 88.5 mm40 parts2LCERN-OHL-S-2.078BBB16 Flex
computergeek1507
162.6 × 59.2 mm26 parts2LCERN-OHL-S-2.078
How designs wire the BEAGLEBONEBLACK
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BEAGLEBONEBLACK connects to, and the resistors, capacitors and other passives placed on it.
- The GPIO1_6 pin is left unconnected on 5 of 5 designs.
- The GPIO1_7 pin is left unconnected on 5 of 5 designs.
- The GPIO1_3 pin is left unconnected on 5 of 5 designs.
- The GPIO1_31 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DGNDpin B1, B2, C1, C2, C43, C44, C45, C46 | Connected to: GND 100% | — |
| GPIO1_6pin B3 | Connected to: Not connected 100% | — |
| GPIO1_7pin B4 | Connected to: Not connected 100% | — |
| GPIO1_2pin B5 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO1_3pin B6 | Connected to: Not connected 100% | — |
| TIMER4pin B7 | Connected to: A connector 40% · not connected 40% |
|
| TIMER7pin B8 | Connected to: Not connected 80% · a signal 20% | — |
| EHRPWM2Bpin B13 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO0_26pin B14 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO1_14pin B16 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO0_27pin B17 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO2_1pin B18 | Connected to: Not connected 60% · a signal 40% | — |
| EHRPWM2Apin B19 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO1_31pin B20 | Connected to: Not connected 100% | — |
| GPIO1_30pin B21 | Connected to: Not connected 100% | — |
| GPIO1_5pin B22 | Connected to: Not connected 100% | — |
| GPIO1_4pin B23 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO1_1pin B24 | Connected to: Not connected 100% | — |
| GPIO1_0pin B25 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO1_29pin B26 | Connected to: Not connected 100% | — |
| GPIO2_22pin B27 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO2_24pin B28 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO2_23pin B29 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO2_25pin B30 | Connected to: Not connected 80% · a signal 20% | — |
| UART5_CTSNpin B31 | Connected to: Not connected 80% · a signal 20% | — |
| UART5_RTSNpin B32 | Connected to: Not connected 80% · a signal 20% | — |
| UART4_RTSNpin B33 | Connected to: Not connected 80% · a signal 20% | — |
| UART3_RTSNpin B34 | Connected to: Not connected 80% · a signal 20% | — |
| UART4_CTSNpin B35 | Connected to: Not connected 80% · a signal 20% | — |
| UART3_CTSNpin B36 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO2_12pin B39 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO2_13pin B40 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO2_10pin B41 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO2_11pin B42 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO2_8pin B43 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO2_9pin B44 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO2_6pin B45 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO2_7pin B46 | Connected to: Not connected 60% · a signal 40% | — |
| VDD_3V3EXPpin C3, C4 | Connected to: 3.3V 60% · a signal 30% | — |
| VDD_5Vpin C5, C6 | Connected to: Not connected 40% · 5V 20% · a signal 40% |
|
46 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BBB16 Expansion by computergeek1507, Mems array by lfochamon, Wearable cape v01 by jreus and Wearable cape v02 by jreus.
The BEAGLEBONEBLACK in open source designs
The gallery holds 6 open source boards using the BEAGLEBONEBLACK from 5 GitHub repositories; a typical one measures about 92.9 × 56.9 mm and carries around 49 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is BBB16 Expansion by computergeek1507.
Parts used alongside the BEAGLEBONEBLACK
What boards using the BEAGLEBONEBLACK are built for
BEAGLEBONEBLACK: common questions
Where can I find a BEAGLEBONEBLACK reference design?
Each of the 6 boards on this page is a real design using the BEAGLEBONEBLACK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BEAGLEBONEBLACK GPIO1_6 pin connected?
The GPIO1_6 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the BEAGLEBONEBLACK.
How is the BEAGLEBONEBLACK GPIO1_7 pin connected?
The GPIO1_7 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the BEAGLEBONEBLACK.
How is the BEAGLEBONEBLACK GPIO1_3 pin connected?
The GPIO1_3 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the BEAGLEBONEBLACK.
How big is a typical board using the BEAGLEBONEBLACK?
The median is 92.9 × 56.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the BEAGLEBONEBLACK?
By GitHub stars, BBB16 Expansion by computergeek1507, with 78 stars.
Can I simulate one of these boards using the BEAGLEBONEBLACK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.