Lightfury right
About the Lightfury right PCB
Lightfury right is an open source PCB design by jusdisgi, published on GitHub under the MIT license. It is a 6-layer board measuring 156 × 116.5 mm, with 82 components from 20 distinct parts.
Other key parts include the TLV61070ADBV and SN74LV1T126DBVR. By type, the board carries 27 switches, 27 LEDs, 14 diodes, 5 capacitors, 2 ICs and 2 resistors.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
Light Fury Keyboard: Ergo Split with 54 PG1316S keyswitches, 54 LEDs, LCDs, and Roller Encoders.
This is a 54-key, ergonomic split keyboard with a few tricks. Some of the features include: - 1.69in color LCD screen - Per-key LEDs, using WS2812B-2020 - A roller encoder based on CKW12 by Kumamuk, but integrated into the main PCB - Kailh PG1316S ultra-low profile switches - A totally absurd battery to run all of this stuff...5Ahr!!
I think it might be done? Could it be? Please take a look and let me know if you see anything wrong!
Main components on the Lightfury right
Lightfury right bill of materials (BOM)
82 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV61070ADBV | SOT-23-6 | U1 |
| 1 | SN74LV1T126DBVR | SOT-23-5 | U2 |
| 1 | LCD HEADER | Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal | CONN1 |
| 1 | Power SW | power_switch_smd_side | PWR1 |
| 1 | CKW12-ENCODER CKW12 | CKW12 | RE1 |
| 1 | Reset SW | reset_switch_smd_side | RST1 |
| 27 | PG1316S | PG1316S | S1, S2, S3, S4, S5, S6, S7, S8 +19 |
| 1 | WS2812B-2020 Outer Bottom | LED_WS2812B-2020_PLCC4_2.0x2.0mm | LED1 |
| 22 | WS2812B-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | LED2, LED3, LED5, LED6, LED7, LED8, LED9, LED10 +14 |
| 1 | WS2812B-2020 Outer Top | LED_WS2812B-2020_PLCC4_2.0x2.0mm | LED4 |
| 1 | WS2812B-2020 Far Thumb | LED_WS2812B-2020_PLCC4_2.0x2.0mm | LED15 |
| 1 | WS2812B-2020 Inner Bottom | LED_WS2812B-2020_PLCC4_2.0x2.0mm | LED24 |
| 1 | WS2812B-2020 Inner Top | LED_WS2812B-2020_PLCC4_2.0x2.0mm | LED27 |
| 14 | BAV70 | BAV70 SOT23 | D1, D2, D3, D4, D5, D6, D7, D8 +6 |
| 1 | 2.2μH | L_CJIANG_FTC404030S_4.1x4.1x3.0_SMD | L1 |
| 1 | 10μF | C_0603_1608Metric | C1 |
| 3 | 10μF 25V | C_0603_1608Metric | C2, C4, C5 |
| 1 | 100nF | C_0603_1608Metric | C3 |
| 1 | 470kΩ | R_0603_1608Metric | R1 |
| 1 | 51kΩ | R_0603_1608Metric | R2 |
Lightfury right design files
The KiCad project lives in the jusdisgi/LightFury repository on GitHub; these links point at the commit this page was built from.
Lightfury right: common questions
How big is the Lightfury right PCB?
The Lightfury right measures 156 × 116.5 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Lightfury right?
82 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lightfury right design files?
From the jusdisgi/LightFury repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lightfury right design in my own project?
Yes, under the terms of its MIT license, which jusdisgi chose for the repository.
More boards in LightFury
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
Protector
byrantech
32.2 × 15.4 mm6 parts2LMIT4.3k
Switch
18.5 × 11.1 mm5 parts2LMIT4.3k