Adafruit ST25DV16
Jvillaso·WallNet·PCB/Components/Adafruit-ST25DV16-PCB-main/Adafruit ST25DV16.kicad_pcb
About the Adafruit ST25DV16 PCB
Adafruit ST25DV16 is an open source PCB design by Jvillaso, published on GitHub. It is a 2-layer board measuring 25.4 × 31.8 mm, with 16 components from 14 distinct parts.
By type, the board carries 5 ICs, 2 capacitors, 1 antenna, 1 jumper, 1 diode and 1 resistor.
From the project
The WallNet
PCB files for the Adafruit Adafruit ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic.
Format is EagleCAD schematic and board layout * https://www.adafruit.com/product/4701
This RFID tag is really unique: it works with mobile phones just like other RFID tags, but you can reprogram it over I2C. The tag shows up as an ISO/IEC 15693 (13.56MHz) chip which is readable by phones and tablets. This could be interesting in situations where you want a tag that can be re-written dynamically when connected to a controller. For example, we did a test where we had a microcontroller write different…

Adafruit ST25DV16 bill of materials (BOM)
16 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | ADAFRUIT_TEXT_20MM | U$1 |
| 1 | — | ADAFRUIT_3.5MM | U$22 |
| 1 | — | PCBFEAT-REV-040 | U$25 |
| 2 | — | STEMMAQT | U$30, U$31 |
| 1 | NFC_ANTENNA_25X15 | NFCANT_25X15 | ANT1 |
| 2 | STEMMA_I2C_QT | JST_SH4 | CONN3, CONN4 |
| 1 | — | 1X06_ROUND_70 | JP1 |
| 1 | ST25DVXX_TSSOP | TSSOP8-4.4MM | RF1 |
| 1 | — | dummyfp0 | UNK_HOLE_0 |
| 1 | — | dummyfp1 | UNK_HOLE_1 |
| 1 | GREEN | CHIPLED_0603_NOOUTLINE | D1 |
| 1 | 0.1uF | 0603-NO | C1 |
| 1 | 10uF | 0805-NO | C3 |
| 1 | 10K | RESPACK_4X0603 | R3 |
Adafruit ST25DV16 design files
The KiCad project lives in the Jvillaso/WallNet repository on GitHub; these links point at the commit this page was built from.
Adafruit ST25DV16: common questions
How big is the Adafruit ST25DV16 PCB?
The Adafruit ST25DV16 measures 25.4 × 31.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adafruit ST25DV16?
16 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adafruit ST25DV16 design files?
From the Jvillaso/WallNet repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adafruit ST25DV16 design in my own project?
The repository has no license, so all rights stay with Jvillaso. Use it as a reference, and ask the author before reusing the design.