WallNet Main
Jvillaso·WallNet·PCB/WallNet-Presentable/WallNet_Main.kicad_pcb
About the WallNet Main PCB
WallNet Main is an open source PCB design by Jvillaso, published on GitHub. It is a 4-layer board measuring 120 × 70.2 mm, with 77 components from 46 distinct parts.
Other key parts include the BT832, BQ25895RTWT, CPT-9019B-SMT-TR and SAM-M10Q-00B. By type, the board carries 22 capacitors, 19 test points, 16 resistors, 6 connectors, 5 diodes and 4 ICs.
From the project
The WallNet
Main components on the WallNet Main
WallNet Main bill of materials (BOM)
77 components, 46 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BT832 | BLEMODULE_BT832 | U1 |
| 1 | BQ25895RTWT | Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U101 |
| 1 | CPT-9019B-SMT-TR | XDCR_CPT-9019B-SMT-TR | U201 |
| 1 | SAM-M10Q-00B | XCVR_SAM-M10Q-00B | U202 |
| 1 | BSS138 | SOT-23 | Q201 |
| 2 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J1, J2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J101 |
| 2 | 01x04 Molex | Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J102, J201 |
| 1 | 02x12 Connector | Amphenol_F32Q-1A7x1-11024_1x24-1MP_P0.5mm_Horizontal | J203 |
| 1 | 436331045822 | 4363X10458XX | S201 |
| 1 | SW | SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW1 |
| 1 | GND | KEYSTONE_5001 | TP2 |
| 1 | BQ_SDA | KEYSTONE_5001 | TP104 |
| 1 | BQ_SCL | KEYSTONE_5001 | TP105 |
| 1 | BQ_INT | KEYSTONE_5001 | TP106 |
| 1 | TS_TX | KEYSTONE_5001 | TP201 |
| 1 | TS_RX | KEYSTONE_5001 | TP202 |
| 1 | GPS_SDA | KEYSTONE_5001 | TP203 |
| 1 | GPS_SCL | KEYSTONE_5001 | TP204 |
| 1 | GPS_INT | KEYSTONE_5001 | TP205 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GPS_TP | KEYSTONE_5001 | TP206 |
| 1 | RFID_SCL | KEYSTONE_5001 | TP207 |
| 1 | RFID_SDA | KEYSTONE_5001 | TP208 |
| 1 | RFID_GPO | KEYSTONE_5001 | TP209 |
| 1 | EP_DC | KEYSTONE_5001 | TP210 |
| 1 | EP_SDA | KEYSTONE_5001 | TP211 |
| 1 | EP_SCL | KEYSTONE_5001 | TP212 |
| 1 | EP_CSB | KEYSTONE_5001 | TP213 |
| 1 | EP_BUSY | KEYSTONE_5001 | TP214 |
| 1 | EP_RESET | KEYSTONE_5001 | TP215 |
| 2 | LED | D_0603_1608Metric | D1, D101 |
| 3 | MBR0530 | D_SOD-123 | D201, D202, D203 |
| 1 | 2.2uH | IND_IMSC1008AZER_VIS | L101 |
| 1 | 68uH | IND_VLS3015CX-680M-H | L201 |
| 2 | 100nF | C_0603_1608Metric | C1, C2 |
| 1 | 4.7uF | C_0805_2012Metric | C3 |
| 5 | 4.7uF | C_0603_1608Metric | C101, C105, C201, C211, C212 |
| 1 | 8.2uF | C_0805_2012Metric | C102 |
| 1 | 10uF | C_0805_2012Metric | C103 |
| 10 | 1uF | C_0603_1608Metric | C104, C202, C203, C204, C205, C206, C207, C208 +2 |
| 2 | 10uF | C_0603_1608Metric | C106, C107 |
| 10 | 10k | R_0603_1608Metric | R1, R104, R105, R106, R107, R108, R201, R203 +2 |
| 2 | 240 | R_0603_1608Metric | R2, R109 |
| 2 | 5.1k | R_0603_1608Metric | R101, R102 |
| 1 | 1k | R_0603_1608Metric | R103 |
| 1 | 2.2 | R_0603_1608Metric | R202 |
WallNet Main design files
The KiCad project lives in the Jvillaso/WallNet repository on GitHub; these links point at the commit this page was built from.
WallNet Main: common questions
How big is the WallNet Main PCB?
The WallNet Main measures 120 × 70.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the WallNet Main?
77 components, from 46 distinct parts. The full bill of materials is listed on this page.
Where can I download the WallNet Main design files?
From the Jvillaso/WallNet repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the WallNet Main design in my own project?
The repository has no license, so all rights stay with Jvillaso. Use it as a reference, and ask the author before reusing the design.