Talnet-STM32-console

JX5S·Talnet-STM32-console·KiCad sources/STM32 Talnet console.kicad_pcb

Talnet-STM32-console PCB layout, top view — open source STM32 board by JX5S

About the Talnet-STM32-console PCB

Talnet-STM32-console is an open source STM32 PCB design by JX5S, published on GitHub under the CC0-1.0 license. It is a 4-layer board measuring 100 × 71.8 mm, with 92 components from 44 distinct parts.

Its main chip is the STM32F412RETx, from the STM32 family. Other key parts include the TP4056, AMS1117-3.3 and BMI160. By type, the board carries 30 resistors, 22 capacitors, 11 connectors, 9 switches, 4 ICs and 3 transistors.

From the project

8. Pokud něco už není na skladě, je potřeba vybrat náhradní součástky. Většinu součástek by šlo nahradit jednoduše. Dne 30.4.2023 bylo na skladě vše, ale zásoba mikrokontroléru už se krátila - měl by jít nahradit rychlejším, ale dražším STM32F446RET6, bez úpravy desky. 9. Objedna

8. Pokud něco už není na skladě, je potřeba vybrat náhradní součástky. Většinu součástek by šlo nahradit jednoduše. Dne 30.4.2023 bylo na skladě vše, ale zásoba mikrokontroléru už se krátila - měl by jít nahradit rychlejším, ale dražším STM32F446RET6, bez úpravy desky. 9. Objednat. Pokud první objednáme z JLCPCB, získáme slevu na poštovné

Displej: https://www.aliexpress.com/item/32843115817.html

Talnet-STM32-console, from the project README
From the project README

Main components on the Talnet-STM32-console

Talnet-STM32-console bill of materials (BOM)

92 components, 44 distinct parts.

QtyPartRefs
1
STM32F412RETx
U1
1
TP4056
U2
1
AMS1117-3.3
U3
1
BMI160
U4
1
SI2302
Q1
2
CJ2302
Q2, Q3
1
25MHz
Y1
1
25MHz
Y2
1
Conn_01x04_Male
J1
1
LCD
J2
1
Mech
J3
1
Joy_P
J4
1
Joy_S
J5
1
USB_C_Receptacle_USB2.0
J6
1
BConn
J7
1
USB_breakout
J8
1
Conn_01x07
J9
1
Conn_01x05
J10
1
Joystick_RKJXV122400R
P1
1
Buzzer
BZ1
Show 24 more
QtyPartRefs
6
M2
H1, H2, H3, H4, H5, H6
1
Jumper_2_Open
JP1
1
10k
RV1
2
SW_Push
SW1, SW4
1
SW_Up
SW2
1
SW_Right
SW3
1
SW_Left
SW5
1
SW_Down
SW6
1
SW_Rsh
SW7
1
SW_Lsh
SW8
1
SW_SPDT
SW9
1
SS14
D1
1
120R
FB1
5
10u
C1, C9, C10, C20, C21
14
100n
C2, C5, C6, C7, C11, C12, C13, C14 +6
2
8p
C3, C4
1
2.2u
C8
4
22R
R1, R2, R24, R25
2
1K5
R3, R23
8
10k
R4, R5, R8, R9, R12, R13, R15, R16
8
1k
R6, R7, R10, R11, R14, R17, R18, R30
2
5K1
R19, R20
2
100K
R21, R22
4
4K7
R26, R27, R28, R29

Talnet-STM32-console design files

The KiCad project lives in the JX5S/Talnet-STM32-console repository on GitHub; these links point at the commit this page was built from.

Talnet-STM32-console: common questions

What microcontroller does the Talnet-STM32-console use?

The Talnet-STM32-console is built around the STM32F412RETx, from the STM32 family.

How big is the Talnet-STM32-console PCB?

The Talnet-STM32-console measures 100 × 71.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Talnet-STM32-console?

92 components, from 44 distinct parts. The full bill of materials is listed on this page.

Where can I download the Talnet-STM32-console design files?

From the JX5S/Talnet-STM32-console repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Talnet-STM32-console design in my own project?

Yes, under the terms of its CC0-1.0 license, which JX5S chose for the repository.

Can I test firmware for the Talnet-STM32-console without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards