E0001-fader driver board
Karpuls·E0001-fader-driver-board
About the E0001-fader driver board
E0001-fader driver board is an open source STM32 PCB design by Karpuls, published on GitHub. It is a 4-layer board measuring 107 × 17 mm, with 50 components from 31 distinct parts.
Its main chip is the STM32C051F6P6, from the STM32 family. Other key parts include the MCP1703AT-3302E/MB, DRV8210PDSGR and TPS259470ARPWR. By type, the board carries 19 capacitors, 17 resistors, 7 diodes, 4 ICs and 2 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
Motorized fader driver board (ALPS RSA0N11M9A0J clone): STM32C051, DRV8210P, touch sense, I2C
Controller board for an ALPS RSA0N11M9A0J-compatible motorized, touch-sensitive 100 mm fader (Amazon.de B0H45B29YK clone). The board mounts under the fader, soldered to its pins.
- Rev B (current): STM32C051F6P6, DRV8210P H-bridge (motor from 5 V), MCP1703A 3.3 V LDO, capacitive touch on the fader lever, position from the 10k linear track, 4-layer, 107 × 17 mm. - Interface: JST GH 4-pin horizontal, Pixhawk/Dronecode I2C pinout (1 = +5 V, 2 = SCL, 3 = SDA, 4 = GND). I2C pull-ups belong on the host. Address via 3 solder jumpers (bottom side), SWD via Tag-Connect TC2030-NL pads (bottom). - Rev…
Main components on the E0001-fader driver board
E0001-fader driver board bill of materials (BOM)
50 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C051F6P6 STMicroelectronics | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | MCP1703AT-3302E/MB Microchip Technology | SOT-89-3 | U2 |
| 1 | DRV8210PDSGR Texas Instruments | Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U3 |
| 1 | TPS259470ARPWR TPS259470ARPW Texas Instruments | TI_RPW0010A_VQFN-HR-10_2x2mm_P0.475mm | U4 |
| 1 | SM04B-GHS-TB(LF)(SN) SM04B-GHS-TB JST Sales America Inc. | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1 |
| 1 | 61300611021 Würth Elektronik | PinHeader_1x06_P2.54mm_Horizontal | J2 |
| 1 | RSA0N11M9A0J B10K clone RSA0N11M9A0J B10K Fastigeaty (seller Fadianshop) | ALPS_RSA0N11M9A0J | RV1 |
| 1 | SMF9.0A Littelfuse Inc. | D_SOD-123F | D1 |
| 3 | PESD5V0L1UL,315 PESD5V0L1UL Nexperia USA Inc. | D_SOD-882 | D2, D4, D5 |
| 1 | LTST-C191KGKT green Lite-On Inc. | LED_0603_1608Metric | D3 |
| 2 | BAT54W,135 BAT54W Nexperia USA Inc. | SOT-323_SC-70 | D6, D7 |
| 4 | TMK212BBJ106MG-T 10uF Taiyo Yuden | C_0805_2012Metric | C1, C11, C12, C20 |
| 3 | GRM188R61E475KE11D 4.7uF Murata Electronics | C_0603_1608Metric | C2, C5, C18 |
| 1 | CL05A105KP5NNNC 1uF Samsung Electro-Mechanics | C_0402_1005Metric | C3 |
| 7 | GRM155R71H104KE14D 100nF Murata Electronics | C_0402_1005Metric | C4, C6, C7, C9, C10, C13, C17 |
| 1 | GRM155R71H103KA88D 10nF Murata Electronics | C_0402_1005Metric | C14 |
| 1 | GRM155R71H472KA01J 4.7nF Murata Electronics | C_0402_1005Metric | C15 |
| 1 | C0402C182K5RACTU 1.8nF KEMET | C_0402_1005Metric | C16 |
| 1 | GRM155R71H102KA01D 1nF Murata Electronics | C_0402_1005Metric | C19 |
| 1 | RC0603FR-0710RL 10R YAGEO | R_0603_1608Metric | R2 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RK73H1ETTP4701F 4.7k KOA Speer Electronics, Inc. | R_0402_1005Metric | R5 |
| 1 | RC0402FR-071ML 1M YAGEO | R_0402_1005Metric | R6 |
| 3 | RC0402FR-071KL 1k YAGEO | R_0402_1005Metric | R7, R10, R18 |
| 1 | RC0402FR-07100KL 100k YAGEO | R_0402_1005Metric | R8 |
| 1 | RC0402FR-0730K1L 30.1k 1% YAGEO | R_0402_1005Metric | R9 |
| 2 | RC0402FR-071ML 1M 1% YAGEO | R_0402_1005Metric | R11, R13 |
| 1 | RC0402FR-07330KL 330k 1% YAGEO | R_0402_1005Metric | R12 |
| 1 | RC0402FR-07137KL 137k 1% YAGEO | R_0402_1005Metric | R14 |
| 1 | RC0402FR-075K23L 5.23k 1% YAGEO | R_0402_1005Metric | R15 |
| 2 | RC0402FR-0710KL 10k YAGEO | R_0402_1005Metric | R16, R17 |
| 2 | RC0402JR-070RL 0R YAGEO | R_0402_1005Metric | R19, R20 |
E0001-fader driver board design files
The KiCad project lives in the Karpuls/E0001-fader-driver-board repository on GitHub; these links point at the commit this page was built from.
E0001-fader driver board: common questions
What microcontroller does the E0001-fader driver board use?
The E0001-fader driver board is built around the STM32C051F6P6, from the STM32 family.
How big is the E0001-fader driver board?
The E0001-fader driver board measures 107 × 17 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the E0001-fader driver board?
50 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the E0001-fader driver board design files?
From the Karpuls/E0001-fader-driver-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the E0001-fader driver board design in my own project?
The repository has no license, so all rights stay with Karpuls. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the E0001-fader driver board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k