QuadGateDriver
About the QuadGateDriver PCB
QuadGateDriver is an open source PCB design by kavionic, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 46 × 37 mm, with 95 components from 41 distinct parts.
Other key parts include the SI8233, NXE2S1212MC and DS18B20. By type, the board carries 26 capacitors, 22 resistors, 10 ICs, 9 diodes and 6 connectors.
From the project
Firmware, support software, and CAD files for my tesla coil project.
Main components on the QuadGateDriver
QuadGateDriver bill of materials (BOM)
95 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SI8233 | SOIC-16_7.5x10.3mm_Pitch1.27mm | U1, U4 |
| 4 | NXE2S1212MC | NXE2_DCDC | U2, U3, U5, U6 |
| 4 | DS18B20 | TO-92_Inline_Narrow_Oval | U7, U8, U9, U10 |
| 1 | CUR_SENS | PinHeader_1x02 | P1 |
| 1 | GDriver2H | SimpleGateDriverOut | P2 |
| 1 | GDriver2L | SimpleGateDriverOut | P3 |
| 1 | CONTROL | PinHeaderMale_2x10 | P4 |
| 1 | GDriver1H | SimpleGateDriverOut | P5 |
| 1 | GDriver1L | SimpleGateDriverOut | P6 |
| 1 | 2HS | TestPoint06 | W1 |
| 1 | 2HG | TestPoint06 | W2 |
| 1 | 2HD | TestPoint06 | W3 |
| 1 | 2LS | TestPoint06 | W4 |
| 1 | 2LG | TestPoint06 | W5 |
| 1 | 2LD | TestPoint06 | W6 |
| 1 | IN2H | TestPoint06 | W7 |
| 2 | IN2G | TestPoint06 | W8, W10 |
| 1 | IN2L | TestPoint06 | W9 |
| 1 | IN1H | TestPoint06 | W11 |
| 2 | IN1G | TestPoint06 | W12, W14 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN1L | TestPoint06 | W13 |
| 1 | 1HS | TestPoint06 | W15 |
| 1 | 1HG | TestPoint06 | W16 |
| 1 | 1HD | TestPoint06 | W17 |
| 1 | 1LS | TestPoint06 | W18 |
| 1 | 1LG | TestPoint06 | W19 |
| 1 | 1LD | TestPoint06 | W20 |
| 1 | CN | TestPoint | W21 |
| 1 | CP | TestPoint | W22 |
| 4 | SMA6F12A | DO-221AC | D1, D2, D5, D7 |
| 4 | DZ2J130M0L | SMini2-F5-B | D3, D4, D6, D8 |
| 1 | LED 0805 GREEN | LED_0805 | D9 |
| 2 | 1u | C_0603 | C1, C6 |
| 16 | 100n | C_0603 | C2, C3, C4, C5, C9, C11, C12, C13 +8 |
| 4 | NP | C_0603 | C7, C8, C15, C18 |
| 4 | 10u | C_1206 | C10, C14, C17, C22 |
| 4 | 2R | R_1206 | R1, R2, R3, R4 |
| 8 | 3R9 | R_1206 | R5, R8, R9, R10, R12, R14, R15, R17 |
| 4 | NP | R_0603 | R6, R11, R13, R16 |
| 5 | 4k7 | R_0603 | R7, R18, R19, R20, R21 |
| 1 | 180 | R_0603 | R22 |
QuadGateDriver design files
The KiCad project lives in the kavionic/TeslaDriver repository on GitHub; these links point at the commit this page was built from.
QuadGateDriver: common questions
How big is the QuadGateDriver PCB?
The QuadGateDriver measures 46 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QuadGateDriver?
95 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the QuadGateDriver design files?
From the kavionic/TeslaDriver repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the QuadGateDriver design in my own project?
Yes, under the terms of its GPL-3.0 license, which kavionic chose for the repository.
More boards in TeslaDriver
TeslaDriver
100 × 100 mm118 parts2LGPL-3.02
AVR/ArduinoTeslaController
71 × 95 mm93 parts2LGPL-3.02
TeslaDriverHP
80 × 100 mm68 parts2LGPL-3.02
DualGateDriver
64 × 23 mm37 parts2LGPL-3.02
DualGateDriverPanel
64 × 69 mm37 parts2LGPL-3.02
GateDriverPanel
100 × 92 mm23 parts2LGPL-3.02
GateDriver
25 × 23 mm23 parts2LGPL-3.02