Daughterboard front
About the Daughterboard front PCB
Daughterboard front is an open source PCB design by KavyanshKhaitan2, published on GitHub. It is a 2-layer board measuring 76.5 × 29.9 mm, with 9 components from 6 distinct parts.
By type, the board carries 5 connectors and 4 switches.
It belongs with the displays & leds and keyboards designs in this gallery.
From the project
A simple docking station to dock your laptop using USB-C!
A very cool laptop docking station with 9 USB-A 2.0 ports!
1. Why? 2. What can it do? 3. Fallout Zine 4. PCB - Mainboard - Left Daughterboard 5. Schematic - Mainboard - Left Daughterboard - Right Daugtherboard - Front Daugtherboard 6. 3D - Main case - Macropad assembly - Macropad case - ePaper assembly - ePaper case 7. Bill of Materials
I made this docking station to change that.
Daughterboard front bill of materials (BOM)
9 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J16 |
| 2 | USB_A | USB_A_Receptacle_GCT_USB1046 | J17, J18 |
| 1 | Conn_01x04 | Molex_200528-0040_1x04-1MP_P1.00mm_Horizontal | J26 |
| 1 | Conn_01x02 | SolderWire-4sqmm_1x02_P12mm_D3mm_OD6mm | J31 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 3 | SW_Push | PinHeader_1x02_P2.54mm_Vertical | SW3, SW4, SW5 |
Daughterboard front design files
The KiCad project lives in the KavyanshKhaitan2/overenginnered-docking-station repository on GitHub; these links point at the commit this page was built from.
Daughterboard front: common questions
How big is the Daughterboard front PCB?
The Daughterboard front measures 76.5 × 29.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Daughterboard front?
9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Daughterboard front design files?
From the KavyanshKhaitan2/overenginnered-docking-station repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Daughterboard front design in my own project?
The repository has no license, so all rights stay with KavyanshKhaitan2. Use it as a reference, and ask the author before reusing the design.
atopile
AxxAxx
tzarc