AVR ISP Pogo
About the AVR ISP Pogo PCB
AVR ISP Pogo is an open source PCB design by kbob, published on GitHub under the CC-BY-4.0 license. It is a board measuring 17.8 × 22.9 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 ICs and 2 jumpers.
From the project
First KiCAD project. Learn KiCAD, blink an LED.
Blinking an LED as it was done in the 1970s (555) and the 1990s (AVR).
I am using this project to learn KiCAD and SMT fabrication. Also learning to use pogo pins to flash a microcontroller.
I designed and built a jig to hold pogo pins against the board's ISP headers to program the AVR. In the end, I did not use the jig; it did not press the pogo pins against the contacts hard enough to make a solid connection.
AVR ISP Pogo bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | — | STAND-OFF | U$1, U$2 |
| 1 | AVR-ISP-6VERT | AVR-ISP-6 | JP1 |
| 1 | POGO-PIN-ISP46MIL | AVR-PPINS-46-6ISP | JP2 |
AVR ISP Pogo design files
The KiCad project lives in the kbob/Blink-Eras repository on GitHub; these links point at the commit this page was built from.
AVR ISP Pogo: common questions
How big is the AVR ISP Pogo PCB?
The AVR ISP Pogo measures 17.8 × 22.9 mm and is 1.6 mm thick.
How many components are on the AVR ISP Pogo?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the AVR ISP Pogo design files?
From the kbob/Blink-Eras repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the AVR ISP Pogo design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which kbob chose for the repository.
