HardLabs

FC THT STACK

keeratrajsinghwork·Stack_based_FC_tMIT·fc_tht/FC_THT_STACK/FC_THT_STACK.kicad_pcb

FC THT STACK PCB layout, top view — open source STM32 board by keeratrajsinghwork

About the FC THT STACK PCB

FC THT STACK is an open source STM32 PCB design by keeratrajsinghwork, published on GitHub. It is a 2-layer board measuring 70 × 70 mm, with 4 components from 4 distinct parts.

Its main chip is the STM32F411CEU6, from the STM32 family. Other key parts include the LPS22HB, LSM6DSO32X and FC_stack.

From the project

Flight Computer designed for thrustMIT for Spaceport America Cup 2024.

Main components on the FC THT STACK

LPS22HBLSM6DSO32XSTM32F411CEU6FC_stack

FC THT STACK bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LPS22HB
U1
1
LSM6DSO32X
U2
1
STM32F411CEU6
U3
1
FC_stack
U4

FC THT STACK design files

The KiCad project lives in the keeratrajsinghwork/Stack_based_FC_tMIT repository on GitHub; these links point at the commit this page was built from.

FC THT STACK: common questions

What microcontroller does the FC THT STACK use?

The FC THT STACK is built around the STM32F411CEU6, from the STM32 family.

How big is the FC THT STACK PCB?

The FC THT STACK measures 70 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FC THT STACK?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FC THT STACK design files?

From the keeratrajsinghwork/Stack_based_FC_tMIT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FC THT STACK design in my own project?

The repository has no license, so all rights stay with keeratrajsinghwork. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FC THT STACK without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Stack_based_FC_tMIT

Similar boards