30 open source boards using the STM32F411CEU6

Real designs built with the STM32F411CEU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

30 boardsClear filters|Most starred

How designs wire the STM32F411CEU6

Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the STM32F411CEU6 connects to, and the resistors, capacitors and other passives placed on it.

  • The PH0 pin has a crystal on 23 of 27 designs, most often 25 MHz (then 8 MHz).
  • The VDD pins have a decoupling capacitor on 23 of 27 designs, most often 100 nF (then 2.2 µF).
  • The PH0 pin has a capacitor to GND on 22 of 27 designs, most often 20 pF (then 18 pF).
  • The VDDA pin has a decoupling capacitor on 22 of 27 designs, most often 100 nF (then 1 µF).
VBATpin 1Connected to: 3.3V 89%
  • Decoupling capacitor on 70% · 100 nF (28), 10 µF (9), 4.7 µF (3)
PC13pin 2Connected to: Not connected 67% · a signal 33%
PC14pin 3Connected to: Not connected 67% · a signal 33%
PC15pin 4Connected to: Not connected 67% · a signal 33%
PH0pin 5Connected to: Signal 96%
  • Crystal on 85% · 25 MHz (8), 8 MHz (3), 24 MHz (2)
  • Capacitor to GND on 81% · 20 pF (5), 18 pF (3), 12 pF (3)
PH1pin 6Connected to: Signal 96%
  • Crystal on 78% · 25 MHz (7), 8 MHz (3), 24 MHz (2)
  • Capacitor to GND on 74% · 20 pF (5), 18 pF (3), 12 pF (2)
NRSTpin 7Connected to: A connector 41%
  • Capacitor to GND on 78% · 100 nF (18), 1 µF (2)
  • Pull-up to 3.3V on 37% · 10 kΩ (10)
VSSApin 8Connected to: GND 96%
VDDApin 9Connected to: 3.3V 85%
  • Decoupling capacitor on 81% · 100 nF (19), 1 µF (11), 10 nF (4)
VCAP1pin 22Connected to: Signal 81%
  • Capacitor to GND on 81% · 4.7 µF (13), 2.2 µF (4), 10 µF (2)
VSSpin 23, 35, 47, 49Connected to: GND 92%
VDDpin 24, 36, 48Connected to: 3.3V 93%
  • Decoupling capacitor on 85% · 100 nF (76), 2.2 µF (13), 10 µF (12)
PA8pin 29Connected to: Not connected 63% · a signal 37%
PB7pin 43Connected to: A connector 48% · not connected 19%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (4), 1.2 kΩ (3), 47 kΩ (1)
BOOT0pin 44Connected to: Signal 93%
  • Resistor to GND on 78% · 10 kΩ (19), 100 kΩ (2)

29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Macrolev by heiso, Openlager by d-ronin, Bonsai C4 by customMK and DroneController by FPV-Drone-STM32F411.

The STM32F411CEU6 in open source designs

The gallery holds 30 open source boards using the STM32F411CEU6 from 28 GitHub repositories; a typical one measures about 57 × 58 mm and carries around 69 components.

50% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.

The most starred is Macrolev by heiso.

Microcontrollers on boards using the STM32F411CEU6

STM32F411CEU6: common questions

Where can I find a STM32F411CEU6 reference design?

Each of the 30 boards on this page is a real design using the STM32F411CEU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM32F411CEU6 PH0 pin connected?

The PH0 pin has a crystal on 23 of 27 designs, most often 25 MHz (then 8 MHz). Counted from the KiCad layouts of 27 open source designs using the STM32F411CEU6.

What decoupling capacitors do designs use on the STM32F411CEU6 VDD pin?

The VDD pins have a decoupling capacitor on 23 of 27 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 27 open source designs using the STM32F411CEU6.

What decoupling capacitors do designs use on the STM32F411CEU6 VDDA pin?

The VDDA pin has a decoupling capacitor on 22 of 27 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 27 open source designs using the STM32F411CEU6.

What parts are used alongside the STM32F411CEU6?

The AMS1117-3.3, ICM-42688-P, MCP73831T-2ACI/OT, A1101ELHL and AP2112K-3.3TRG1 appear in the most repositories here.

Which microcontrollers do boards using the STM32F411CEU6 use?

Most are built on STM32 (30).

How big is a typical board using the STM32F411CEU6?

The median is 57 × 58 mm, and 50% are two-layer designs.

What is the most popular open source board using the STM32F411CEU6?

By GitHub stars, Macrolev by heiso, with 133 stars.

Can I simulate one of these boards using the STM32F411CEU6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part