Microcurrent-Mouse

khangnguyen290407·Microcurrent-Mouse·hardware/mach_chuot_may_tinh/mach_chuot_may_tinh.kicad_pcb

Microcurrent-Mouse PCB layout, top view — open source STM32 board by khangnguyen290407

About the Microcurrent-Mouse PCB

Microcurrent-Mouse is an open source STM32 PCB design by khangnguyen290407, published on GitHub. It is a 2-layer board measuring 58 × 99 mm, with 46 components from 41 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the MCP73831_LiPo_Chg, AP2112K-3.3_LDO, TPS61040DBVR_24V, OPA333_CCS_Ctrl and PAW3395_Optical_Sensor. By type, the board carries 17 resistors, 8 capacitors, 6 ICs, 5 connectors, 4 switches and 3 diodes.

From the project

Dự Án: Chuột Máy Tính Tích Hợp Vi Dòng Điện (Microcurrent Mouse)

# Dá»± Án: Chuá»™t Máy Tính Tích Hợp Vi Dòng Điện (Microcurrent Mouse)

Main components on the Microcurrent-Mouse

MCP73831_LiPo_ChgAP2112K-3.3_LDOSTM32F103C8T6TPS61040DBVR_24VOPA333_CCS_CtrlPAW3395_Optical_Sensor

Microcurrent-Mouse bill of materials (BOM)

46 components, 41 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP73831_LiPo_Chg
U1
1
AP2112K-3.3_LDO
U2
1
STM32F103C8T6
U3
1
TPS61040DBVR_24V
U4
1
OPA333_CCS_Ctrl
U5
1
PAW3395_Optical_Sensor
U6
1
BC847_CCS
Q1
1
USB_C_2.0
J1
1
LiPo_3.7V_400mAh
J2
1
PALM_ELECTRODE_POGO
J3
1
THUMB_ELECTRODE_POGO
J4
1
SWD_Header
J5
1
PTC_50mA_Safety
F1
1
LEFT_CLICK
SW1
1
RIGHT_CLICK
SW2
1
MENS_MODE_BTN
SW3
1
SCROLL_WHEEL_ENC
SW4
1
CHG_LED
D1
1
MBR0540_40V
D2
1
MENS_LED
D3
Show 21 more
QtyPartRefs
1
10uH_SMD
L1
1
4.7uF
C1
1
10uF
C2
3
100nF
C3, C4, C5
1
1uF_50V
C6
1
100nF_LPF
C7
1
1uF_50V_ZeroDC
C8
2
5.1k
R1, R2
1
2k_500mA
R3
3
1k
R4, R9, R14
1
180k_1%
R5
1
10k_1%
R6
1
10k_DAC_LPF
R7
1
8.2k_Rsense
R8
1
39k_HW_Limit
R10
1
10k_PhaseA
R11
1
100k_Skin_Sense
R12
1
15k_Skin_Sense
R13
1
1.5k_USB_PU
R15
1
10k_NRST
R16
1
10k_PhaseB
R17

Microcurrent-Mouse design files

The KiCad project lives in the khangnguyen290407/Microcurrent-Mouse repository on GitHub; these links point at the commit this page was built from.

Microcurrent-Mouse: common questions

What microcontroller does the Microcurrent-Mouse use?

The Microcurrent-Mouse is built around the STM32F103C8T6, from the STM32 family.

How big is the Microcurrent-Mouse PCB?

The Microcurrent-Mouse measures 58 × 99 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Microcurrent-Mouse?

46 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Microcurrent-Mouse design files?

From the khangnguyen290407/Microcurrent-Mouse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Microcurrent-Mouse design in my own project?

The repository has no license, so all rights stay with khangnguyen290407. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Microcurrent-Mouse without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards