Kommunikationsmodul LORA
About the Kommunikationsmodul LORA PCB
Kommunikationsmodul LORA is an open source STM32 PCB design by KhanKudo, published on GitHub. It is a 4-layer board measuring 49.6 × 29.3 mm, with 27 components from 20 distinct parts.
Its main chip is the STM32H573RITx, from the STM32 family. Other key parts include the RFM95W-868S2 and AMS1117-3.3. By type, the board carries 13 capacitors, 4 connectors, 4 resistors, 3 ICs, 1 crystal and 1 antenna.
It belongs with the rf & radio designs in this gallery.
From the project
HTL tgm Diplomprojekt RTLS (IOO), Gruppe Foldlabs, Jahrgang 2023/24
Main components on the Kommunikationsmodul LORA
Kommunikationsmodul LORA bill of materials (BOM)
27 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H573RITx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | RFM95W-868S2 | HOPERF_RFM9XW_SMD | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | 25MHz | Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J3 |
| 1 | LORA_ANN | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Antenna_Shield | U.FL_Molex_MCRF_73412-0110_Vertical | AE1 |
| 1 | PWR | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 2 | 2.2u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 5 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7, C10, C12 |
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C11 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 10U | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C18 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 1 | 100E | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
Kommunikationsmodul LORA design files
The KiCad project lives in the KhanKudo/diplomprojekt repository on GitHub; these links point at the commit this page was built from.
Kommunikationsmodul LORA: common questions
What microcontroller does the Kommunikationsmodul LORA use?
The Kommunikationsmodul LORA is built around the STM32H573RITx, from the STM32 family.
How big is the Kommunikationsmodul LORA PCB?
The Kommunikationsmodul LORA measures 49.6 × 29.3 mm, has 4 copper layers and is 0.6 mm thick.
How many components are on the Kommunikationsmodul LORA?
27 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kommunikationsmodul LORA design files?
From the KhanKudo/diplomprojekt repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kommunikationsmodul LORA design in my own project?
The repository has no license, so all rights stay with KhanKudo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kommunikationsmodul LORA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in diplomprojekt
STM32Kommunikationsmodul Ethernet
73.4 × 76.2 mm126 parts4LNo license0
Silicon LabsRTLS Mainboard V4
45 × 45 mm74 parts4LNo license0
Silicon LabsAntenneschalter V2
58.1 × 65 mm63 parts4LNo license0- schematic only · 60 partsSilicon Labs
RTLS Mainboard V4 Reduced
60 parts4LNo license0 
ESP8266Kommunikationsmodul WLAN
49.6 × 29.3 mm32 parts4LNo license0
Antennenschalter V1
49 × 36.5 mm31 parts2LNo license0
RTLS BLE GPS
65 × 46.2 mm14 parts2LNo license0
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type g
169 × 30 mm24 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type c
188 × 30 mm17 parts2LApache-2.02.9k