Anemometer
About the Anemometer PCB
Anemometer is an open source PCB design by KhazAkar, published on GitHub under the MIT license. It is a 2-layer board measuring 34 × 13.5 mm, with 9 components from 9 distinct parts.
Other key parts include the PCF8574 and SS360PT. By type, the board carries 3 resistors, 2 ICs, 1 transistor, 1 connector, 1 diode and 1 capacitor.
From the project
[MOVED to GitLab: https://gitlab.com//r3xxar/espws] Weather station firmware for ESP8266 - mirror
Main components on the Anemometer
Anemometer bill of materials (BOM)
9 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF8574 | SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | SS360PT | SOT-23 | U2 |
| 1 | LL-304PTC4B-1AD | LED_D3.0mm_Clear | Q1 |
| 1 | Connector for motherboard | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | TSAL4400 | LED_D3.0mm_IRBlack | D1 |
| 1 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 39 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 10k | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 2k | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
Anemometer design files
The KiCad project lives in the KhazAkar/espws repository on GitHub; these links point at the commit this page was built from.
Anemometer: common questions
How big is the Anemometer PCB?
The Anemometer measures 34 × 13.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Anemometer?
9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Anemometer design files?
From the KhazAkar/espws repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Anemometer design in my own project?
Yes, under the terms of its MIT license, which KhazAkar chose for the repository.
