Moids infinity
kinoshita-lab·moids_infinity·kicad/moids_infinity/moids_infinity.kicad_pcb
About the Moids infinity PCB
Moids infinity is an open source PCB design by kinoshita-lab, published on GitHub. It is a 2-layer board measuring 122 × 20.1 mm, with 56 components from 25 distinct parts.
Other key parts include the LMV358 and NE555. By type, the board carries 19 resistors, 15 capacitors, 6 transistors, 6 diodes, 2 ICs and 1 connector.
Main components on the Moids infinity
Moids infinity bill of materials (BOM)
56 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMV358 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | NE555 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 3 | 2SC3325-Y 2sc3325-y | SOT-23 | Q1, Q2, Q5 |
| 1 | 2SA1313 2sa1313 | SOT-23 | Q3 |
| 1 | SSM3K329R | SOT-23 | Q4 |
| 1 | 2SD0965 Q_NPN_ECB | TO-92_Inline_Wide | Q6 |
| 1 | Conn_02x03_Odd_Even | Pin_Header_Straight_2x03_Pitch2.54mm | J1 |
| 1 | ECM_C9767 | CONDENCER_MICROPHONE_C9767 | ECM1 |
| 2 | TERMINAL | SolderWirePad_single_SMD_1x3mm | JT1, JT2 |
| 1 | 1k | Potentiometer_Trimmer-TSR-C3305 | RV1 |
| 1 | 10k | Potentiometer_Trimmer-TSR-C3305 | RV2 |
| 1 | digit_junk_trans | digit_junk_transformer | T1 |
| 1 | TEST | Pin_Header_Straight_1x01_Pitch1.00mm | TP1 |
| 1 | D | D_SOD-123 | D1 |
| 1 | LED | LED_0603 | D2 |
| 4 | D | DO-214AC | D3, D4, D5, D6 |
| 2 | 10U 10u | C_0603 | C2, C13 |
| 7 | 0.1U 0.1u | C_0603 | C3, C4, C6, C7, C8, C11, C12 |
| 2 | 560P 560p | C_0603 | C5, C9 |
| 4 | 2200P 2200p | C_1206 | C14, C15, C16, C17 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 1k | R_0603_wide | R1, R3, R6, R7, R16 |
| 6 | 10K 10k | R_0603_wide | R2, R4, R5, R8, R14, R17 |
| 5 | 1M | R_0603_wide | R9, R10, R12, R15, R19 |
| 2 | 100K 100k | R_0603_wide | R11, R13 |
| 1 | 200 | R_0603_wide | R18 |
Moids infinity design files
The KiCad project lives in the kinoshita-lab/moids_infinity repository on GitHub; these links point at the commit this page was built from.
Moids infinity: common questions
How big is the Moids infinity PCB?
The Moids infinity measures 122 × 20.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Moids infinity?
56 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Moids infinity design files?
From the kinoshita-lab/moids_infinity repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Moids infinity design in my own project?
The repository has no license, so all rights stay with kinoshita-lab. Use it as a reference, and ask the author before reusing the design.