HardLabs

AMC Template

kit-ipe·ATCA-Example-Project-Template·amc_template/amc_template.kicad_pcb

AMC Template PCB layout, top view — open source AVR/Arduino board by kit-ipe

About the AMC Template PCB

AMC Template is an open source AVR/Arduino PCB design by kit-ipe, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 180.6 × 73.5 mm, with 87 components from 39 distinct parts.

Its main chip is the ATmega128L-8MU, from the AVR/Arduino family. Other key parts include the LM75AD,118, PCF8574PW, SN74LVC06APWR, LM1117-5.0 and AT24C512C. By type, the board carries 42 resistors, 14 diodes, 14 capacitors, 8 ICs, 6 connectors and 2 switches.

From the project

ATCA template containing multiple sub-projects.

ATCA template containing multiple sub-projects.

- fbatemplate "Full FBA" - Carrier Style with debugging with KRIA SoC and Carrier according to AMC.0 Spec. - rtmtemplate "Full RTM" - RTM to be used with "Full Version" - amctemplate "AMC" - AMC to be used with "Full FBA" or "Carrier FBA" - ledpcb: LED PCB to be used with every AMC Carier

- BOM: example BOM combination for one assemby of 1 Full FBA, 1 Full RTM and 1 LED PCB and 4 AMC

Main components on the AMC Template

LM75AD,118PCF8574PWSN74LVC06APWRATmega128L-8MULM1117-5.0AT24C512CTPS3808DBVSN74LVC07APWAMC_FrontPanel

AMC Template bill of materials (BOM)

87 components, 39 distinct parts.

QtyPartRefs
1
LM75AD,118
IC1
1
PCF8574PW
U1
1
SN74LVC06APWR
U2
1
ATmega128L-8MU
U3
1
LM1117-5.0
U4
1
AT24C512C
U5
1
TPS3808DBV
U6
1
SN74LVC07APW
U7
1
AMC_FrontPanel
A1
1
AMC_ESD_strip
J1
1
AMC_Extended_Edge_Connector
J2
2
Conn_02x05_Odd_Even
J3, J4
1
Conn_3V3_EXT
J5
1
Conn_02x05_Odd_Even
J6
1
20849-209
SW1
1
PTS645VK83-2 LFS
SW2
1
RED
D1
1
GRN
D2
1
BLUE
D3
2
BAT46GWX
D4, D5
Show 19 more
QtyPartRefs
1
DZ9F3V6S92-7
D6
8
GRN
D7, D8, D9, D10, D11, D12, D13, D14
9
100nF
C1, C3, C4, C7, C8, C11, C12, C13 +1
3
10uF
C2, C9, C10
2
470nF
C5, C6
6
10k
R1, R7, R8, R9, R10, R11
2
68
R2, R3
1
82
R4
2
10M 2kV
R5, R6
2
150k
R12, R14
1
30k
R13
1
4k7
R15
7
330
R16, R19, R20, R21, R25, R26, R27
1
390k
R17
1
DNP
R18
1
12k
R22
8
33k
R23, R24, R28, R29, R30, R31, R32, R33
1
51k
R34
8
150
R35, R36, R37, R38, R39, R40, R41, R42

AMC Template design files

The KiCad project lives in the kit-ipe/ATCA-Example-Project-Template repository on GitHub; these links point at the commit this page was built from.

AMC Template: common questions

What microcontroller does the AMC Template use?

The AMC Template is built around the ATmega128L-8MU, from the AVR/Arduino family.

How big is the AMC Template PCB?

The AMC Template measures 180.6 × 73.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the AMC Template?

87 components, from 39 distinct parts. The full bill of materials is listed on this page.

Where can I download the AMC Template design files?

From the kit-ipe/ATCA-Example-Project-Template repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AMC Template design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which kit-ipe chose for the repository.

Can I test firmware for the AMC Template without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in ATCA-Example-Project-Template

Similar boards