STYX32
kiu·STYX32·REV_A/kicad/STYX32.kicad_pcb
About the STYX32 PCB
STYX32 is an open source STM32 PCB design by kiu, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 143.5 × 50.8 mm, with 48 components from 29 distinct parts.
Its main chip is the STM32C011F4PX, from the STM32 family. Other key parts include the AMS1117-3.3 and CH340N. By type, the board carries 16 resistors, 10 connectors, 9 capacitors, 6 diodes, 3 ICs and 2 switches.

Main components on the STYX32
STYX32 bill of materials (BOM)
48 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | CH340N | SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | STM32C011F4PX STM32C011F4Px | TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | C165948 USB_C_Receptacle 16P | USB_C_Receptacle_Korean_Hroparts_Elec_TYPE-C-31-M-12 | J1 |
| 3 | 1X03_JUMPER 1x03_Jumper | PinHeader_1x03_P2.54mm_Vertical | J2, J3, J4 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | IDC-Header_2x10_P2.54mm_Vertical | J5 |
| 2 | CONN_02X03_ODD_EVEN Conn_02x03_Odd_Even | IDC-Header_2x03_P2.54mm_Vertical | J6, J7 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | IDC-Header_2x04_P2.54mm_Vertical | J8 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J9 |
| 1 | CONN_02X03_ODD_EVEN Conn_02x03_Odd_Even | IDC-Header_2x03_P1.27mm_Vertical_SMD | J10 |
| 1 | C2843931 RESET | SW_PUSH-12mm | SW1 |
| 1 | C2843931 BOOT | SW_PUSH-12mm | SW2 |
| 2 | 5011 Keystone Electronics | TestPoint_Keystone_5010-5014_Multipurpose | TP1, TP2 |
| 1 | C7545697 red | LED_1206_TOGIALED TJ-S3216SWETNPLC2_REVERSE | D1 |
| 1 | C7545703 gn | LED_1206_TOGIALED TJ-S3216SWETNPLC2_REVERSE | D2 |
| 1 | C7545709 or | LED_1206_TOGIALED TJ-S3216SWETNPLC2_REVERSE | D3 |
| 1 | C7545699 ye | LED_1206_TOGIALED TJ-S3216SWETNPLC2_REVERSE | D4 |
| 1 | C7545707 wh | LED_1206_TOGIALED TJ-S3216SWETNPLC2_REVERSE | D5 |
| 1 | C7545701 bl | LED_1206_TOGIALED TJ-S3216SWETNPLC2_REVERSE | D6 |
| 1 | 10UF 10uF | CP_EIA-3216-18_Kemet-A | C1 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22UF 22uF | CP_EIA-3216-18_Kemet-A | C2 |
| 5 | 100NF 100nF | C_0805_2012Metric | C3, C5, C6, C8, C9 |
| 1 | 1UF 1uF | C_0805_2012Metric | C4 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C7 |
| 2 | 5K1 5k1 | R_0805_2012Metric | R1, R2 |
| 5 | 270R | R_0805_2012Metric | R3, R7, R8, R9, R10 |
| 1 | 47R | R_0805_2012Metric | R4 |
| 2 | 120R | R_0805_2012Metric | R5, R6 |
| 6 | 1M | R_0805_2012Metric | R11, R12, R13, R14, R15, R16 |
STYX32 design files
The KiCad project lives in the kiu/STYX32 repository on GitHub; these links point at the commit this page was built from.
STYX32: common questions
What microcontroller does the STYX32 use?
The STYX32 is built around the STM32C011F4PX, from the STM32 family.
How big is the STYX32 PCB?
The STYX32 measures 143.5 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STYX32?
48 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STYX32 design files?
From the kiu/STYX32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STYX32 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the STYX32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k