79 open source boards using the CH340N
Real designs built with the CH340N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vsf gd32h759
vsfteam
62.2 × 99.1 mm127 parts2LApache-2.0340NekoInk
zephray
60 × 60 mm231 parts4LCERN-OHL-P-2.0106Closed deck x4
OpenLogicEFI
115.5 × 96.2 mm212 parts4LNo license18STM32
Taiko-Input
AnalogDragon
85 × 100 mm235 parts2LCustom license16Opsum
nitefood
80 × 50 mm41 parts2LMIT5STM32
Floppy board 3.0
FloppyO1
20.5 × 41.2 mm33 parts2LCERN-OHL-S-2.05STM32
OzzyBoard
vbalsan
100 × 100 mm278 parts4LGPL-2.04Arduino UNO Experimental Shield
ffich
68.6 × 53.3 mm68 parts4LMIT4AVR/Arduino
Emuprom
agkaminski
88.3 × 68.6 mm34 parts2LCC0-1.03ESP32
ILI9341 ESP32
theBrutzler
129.1 × 81 mm161 parts2LNo license2FellaPC
agkaminski
284.9 × 96.5 mm107 parts2LCC0-1.02Tinynode
Stary2001
80 × 60 mm63 parts4LCERN-OHL-P-2.02ESP32
CC14
BadgePiratesLLC
129.5 × 103.5 mm58 parts2LMIT2STM32
Comprehensive-Design and-Practice-Project-A---Digital-Thermometer-Based on-NTC
xuejun7777
69 × 79 mm44 parts2LNo license2ESP32
OpenAV
JIBSIL
70.3 × 53.9 mm35 parts2LMIT2STM32
Rack ser adapter tester
eurovibes
150 × 120 mm126 parts4LCERN-OHL-S-2.01Bluepill Carrier
ffich
81.3 × 86.4 mm83 parts4LMIT1ESP32
ESP32-Temperature-WebServer
marcosindiano7
80 × 80 mm68 parts2LNo license1ESP8266
Endev v1.1
sophiayduan
36 × 70 mm59 parts2LMIT1STM32
Scl3300-d01-evb
anyshake
65 × 40 mm58 parts2LNo license1STM32
Protocol Analyzer
Sidharth-Saji
66 × 45.5 mm31 parts2LNo license1Gatebench
alheir
150 × 150 mm305 parts4LCERN-OHL-P-2.00RP2040/RP2350
Nref motherboard
cetola
122.6 × 75.9 mm269 parts6LNo license0RP2040/RP2350
Skeeball premium re
mikenemat
116.7 × 85.7 mm208 parts4LNo license0ESP32
Joker60 mkII
ZeshuLiu
323.5 × 102.5 mm193 parts2LMIT0RP2040/RP2350
E1041
Electro707
116 × 90 mm137 parts2LGPL-3.00Zak180
agkaminski
188 × 128.3 mm128 parts4LCC-BY-NC-4.00STM32
Belegt
eurovibes
60 × 145 mm120 parts4LCERN-OHL-S-2.00ZAK181
agkaminski
215.3 × 96.8 mm111 parts4LCC-BY-NC-4.00ESP32
SingleDigitVFDDriver
Electro707
79 × 72 mm106 parts2LGPL-3.00STM32
G431-Board
Pledoge
77 × 44 mm102 parts2LNo license0STM32
Dcclicht
eurovibes
80 × 80 mm101 parts2LCERN-OHL-S-2.00STM32
Steam pigeon locator hardware
fschroer
54 × 25 mm98 parts4LNo license0ESP32
LucaudioESP32
lucococo
92.4 × 70 mm91 parts2LNo license0AVR/Arduino
169 node
vsb-fei-440
50 × 55.9 mm65 parts4LMIT0ESP32
Juk2
lysolaka
90 × 100 mm64 parts2LGPL-3.00
How designs wire the CH340N
Read from the KiCad layouts of 63 open source designs, one per repository: what each pin of the CH340N connects to, and the resistors, capacitors and other passives placed on it.
- The V3 pin has a capacitor to GND on 50 of 63 designs, most often 100 nF (then 1 µF).
- The VCC pin has a decoupling capacitor on 43 of 63 designs, most often 100 nF (then 1 µF).
- The RTS pin is left unconnected on 51 of 63 designs (a signal on 12).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 95% | — |
| RTSpin 4 | Connected to: Not connected 81% · a signal 19% | — |
| VCCpin 5 | Connected to: 3.3V 86% |
|
| V3pin 8 | Connected to: Signal 49% · 3.3V 46% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NMEA2000Adapter-8.1 by peterantypas, Uikit by vsfteam, NekoInk by zephray and MYNDberry by teufelaudio.
The CH340N in open source designs
The gallery holds 79 open source boards using the CH340N from 65 GitHub repositories; a typical one measures about 69.7 × 60 mm and carries around 54 components.
65% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is NMEA2000Adapter-8.1 by peterantypas.
Parts used alongside the CH340N
Microcontrollers on boards using the CH340N
What boards using the CH340N are built for
CH340N: common questions
Where can I find a CH340N reference design?
Each of the 79 boards on this page is a real design using the CH340N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CH340N V3 pin connected?
The V3 pin has a capacitor to GND on 50 of 63 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 63 open source designs using the CH340N.
What decoupling capacitors do designs use on the CH340N VCC pin?
The VCC pin has a decoupling capacitor on 43 of 63 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 63 open source designs using the CH340N.
How is the CH340N RTS pin connected?
The RTS pin is left unconnected on 51 of 63 designs (a signal on 12). Counted from the KiCad layouts of 63 open source designs using the CH340N.
What parts are used alongside the CH340N?
The AMS1117-3.3, USBLC6-2SC6, 74HC244, MAX232 and SRV05-4 appear in the most repositories here.
Which microcontrollers do boards using the CH340N use?
Most are built on STM32 (20), ESP32 (11), AVR/Arduino (6) and RP2040/RP2350 (5).
How big is a typical board using the CH340N?
The median is 69.7 × 60 mm, and 65% are two-layer designs.
What is the most popular open source board using the CH340N?
By GitHub stars, NMEA2000Adapter-8.1 by peterantypas, with 446 stars.
Can I simulate one of these boards using the CH340N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.