DeltaT26-Keel
Kleavox·deltaT26-Keel·hardware/deltaT26.kicad_pcb
About the DeltaT26-Keel PCB
DeltaT26-Keel is an open source PCB design by Kleavox, published on GitHub. It is a 2-layer board measuring 85 × 56 mm, with 41 components from 23 distinct parts.
Other key parts include the INA226AIDGSR and MAX16054AZT+T. By type, the board carries 17 capacitors, 8 resistors, 5 connectors, 3 fuses, 3 diodes and 2 ICs.
From the project
HAT tengah untuk Raspberry Pi 4: distribusi daya + hub USB3 on-board + telemetri untuk NAS 2-disk, disatukan lewat tumpukan Pi 4 → Keel → EP-0152 dengan duct 3D-print sendiri buat mendinginkan SoC.
HAT tengah untuk Raspberry Pi 4: distribusi daya + hub USB3 on-board + telemetri untuk NAS 2-disk, disatukan lewat tumpukan Pi 4 → Keel → EP-0152 dengan duct 3D-print sendiri buat mendinginkan SoC.
Setup awalnya: Raspberry Pi 4 + 2 HDD eksternal (lewat USB3) + modul kipas/OLED EP-0152 di atasnya, semua nyambung lewat kabel dan adaptor terpisah-pisah — hub USB3 eksternal sendiri, adaptor daya disk sendiri, gak ada cara gampang monitor tegangan/arus keseluruhan sistem. Solusi komersial yang paling mendekati (mis. Geekworm X828-series) mahal dan susah didapat di pasar lokal.

Main components on the DeltaT26-Keel
DeltaT26-Keel bill of materials (BOM)
41 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA226AIDGSR | MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | MAX16054AZT+T | SOT-23-6 | U2 |
| 1 | AO4407A | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | USB-C Power Only 5v | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | USB3_A_Stacked | USB3_A_Molex_48406-0001_Horizontal_Stacked | J2, J3 |
| 1 | Pi Header Stacking | PinSocket_2x20_P2.54mm_Vertical | J6 |
| 1 | T19 Pin | JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal | J12 |
| 2 | 2A/16V | Fuse_1812_4532Metric | F2, F3 |
| 1 | 2.6A/16V | Fuse_1812_4532Metric | F4 |
| 1 | EVQP7A | SW_SPST_EVQP7A | SW1 |
| 1 | RED | LED_0805_2012Metric | LED1 |
| 3 | SMBJ5.0A | D_SMB | D1, D2, D3 |
| 2 | 1000uF/10V Low ESR | CP_Elec_8x10.5 | C1, C5 |
| 4 | 100nF | C_0805_2012Metric | C2, C4, C6, C7 |
| 1 | 1000u/10V Low ESR | CP_Elec_8x10.5 | C3 |
| 10 | 100nF | C_0603_1608Metric | C36, C37, C38, C39, C40, C41, C42, C43 +2 |
| 2 | 5k1 | R_0805_2012Metric | R1, R2 |
| 1 | 1k | R_0805_2012Metric | R3 |
| 1 | 10m 1W | R_2512_6332Metric | R4 |
| 1 | 470k | R_0805_2012Metric | R5 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47k | R_0805_2012Metric | R6 |
| 1 | 10k | R_0805_2012Metric | R7 |
| 1 | 15k | R_0805_2012Metric | R8 |
DeltaT26-Keel design files
The KiCad project lives in the Kleavox/deltaT26-Keel repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/deltaT26.kicad_pcb
- Schematichardware/deltaT26.kicad_sch
DeltaT26-Keel: common questions
How big is the DeltaT26-Keel PCB?
The DeltaT26-Keel measures 85 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DeltaT26-Keel?
41 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the DeltaT26-Keel design files?
From the Kleavox/deltaT26-Keel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DeltaT26-Keel design in my own project?
The repository has no license, so all rights stay with Kleavox. Use it as a reference, and ask the author before reusing the design.