Atari 2600 AV Mod
About the Atari 2600 AV Mod PCB
Atari 2600 AV Mod is an open source PCB design by knightfox75, published on GitHub under the MIT license. It is a 2-layer board measuring 52 × 28 mm, with 20 components from 15 distinct parts.
Other key parts include the 4050. By type, the board carries 8 resistors, 6 connectors, 3 capacitors, 1 IC and 1 transistor.
From the project
Adds AV output to an Atari 2600 video console
Main components on the Atari 2600 AV Mod
Atari 2600 AV Mod bill of materials (BOM)
20 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4050 | DIP-16_W7.62mm_Socket | U1 |
| 1 | 2SC1815 | TO-92_HandSolder | Q1 |
| 1 | INPUT | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | OUTPUT | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 4 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J3, J4, J5, J6 |
| 1 | 50K | Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | 100uF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 100nF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 47uF | CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 1K2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 2 | 2K2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R6 |
| 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 1 | 680R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 2 | 22K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5, R7 |
| 1 | 75R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8 |
Atari 2600 AV Mod design files
The KiCad project lives in the knightfox75/Atari_2600_AV_Mod repository on GitHub; these links point at the commit this page was built from.
Atari 2600 AV Mod: common questions
How big is the Atari 2600 AV Mod PCB?
The Atari 2600 AV Mod measures 52 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Atari 2600 AV Mod?
20 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Atari 2600 AV Mod design files?
From the knightfox75/Atari_2600_AV_Mod repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Atari 2600 AV Mod design in my own project?
Yes, under the terms of its MIT license, which knightfox75 chose for the repository.