29 open source boards using the 4050

Real designs built with the 4050, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

29 boardsClear filters|Most starred

How designs wire the 4050

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the 4050 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 13 is left unconnected on 22 of 22 designs.
  • The VCC pin has a decoupling capacitor on 15 of 23 designs, most often 100 nF (then 10 µF).
VCCpin 1Connected to: 3.3V 87%
  • Decoupling capacitor on 65% · 100 nF (17), 10 µF (2), 47 µF (2)
VSSpin 8Connected to: GND 96%
Pin 13Connected to: Not connected 100%
NCpin 16Connected to: Not connected 95%

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MegaMIDI by AidanHockey5, Genny by superjoebob, AS3397 proto DIP by PhysicsDptAngers and Z80blinken by jblang.

The 4050 in open source designs

The gallery holds 29 open source boards using the 4050 from 23 GitHub repositories; a typical one measures about 85.6 × 93.5 mm and carries around 77 components.

66% are two-layer designs, the rest use four layers or more, and 66% carry an open source license.

The most starred is MegaMIDI by AidanHockey5.

Microcontrollers on boards using the 4050

4050: common questions

Where can I find a 4050 reference design?

Each of the 29 boards on this page is a real design using the 4050. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 4050 pin 13 connected?

Pin 13 is left unconnected on 22 of 22 designs. Counted from the KiCad layouts of 23 open source designs using the 4050.

What decoupling capacitors do designs use on the 4050 VCC pin?

The VCC pin has a decoupling capacitor on 15 of 23 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 23 open source designs using the 4050.

What parts are used alongside the 4050?

The AMS1117-3.3, ATmega328P-A, TL072, 24AA256 and 4013 appear in the most repositories here.

Which microcontrollers do boards using the 4050 use?

Most are built on AVR/Arduino (7), ESP32 (4), PIC (3) and RP2040/RP2350 (2).

How big is a typical board using the 4050?

The median is 85.6 × 93.5 mm, and 66% are two-layer designs.

What is the most popular open source board using the 4050?

By GitHub stars, MegaMIDI by AidanHockey5, with 116 stars.

Can I simulate one of these boards using the 4050 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part