K0d3ball35 trackball sensor board (PMW3610)

konstantindenerz·k0d3ball35·hardware/sensor-pcb/k0d3ball35-sensor.kicad_pcb

K0d3ball35 trackball sensor board (PMW3610) layout, top view — open source board by konstantindenerz

About the K0d3ball35 trackball sensor board (PMW3610)

K0d3ball35 trackball sensor board (PMW3610) is an open source PCB design by konstantindenerz, published on GitHub under the MIT license. It is a 2-layer board measuring 26 × 25 mm, with 15 components from 11 distinct parts.

Other key parts include the PMW3610DM-SUDU and XC6206P182MR. By type, the board carries 9 capacitors, 3 resistors, 2 ICs and 1 connector.

It belongs with the keyboards, sensors and iot & wireless designs in this gallery.

From the project

Wireless 35-key low-profile split keyboard with a 19 mm trackball in the case pocket. ZMK firmware, Choc V1 hot-swap, nice!nano v2 per half.

26 x 25 mm, two layer, 1.6 mm FR4. Carries the PixArt PMW3610DM-SUDU laser sensor with its LM18-LSI lens, a 1.8 V regulator and a 6-pin 0.5 mm FPC connector to the main PCB. Design notes, stack-up and the FFC orientation rule are in spec/08-trackball-module.md.

generate.py all writes libraries, schematic and an unrouted PCB, autoroutes it with freerouting, adds the ground pours and re-runs ERC and DRC (with schematic parity) until the result is clean. export.sh refuses to export when ERC or DRC report errors.

Main components on the K0d3ball35 trackball sensor board (PMW3610)

K0d3ball35 trackball sensor board (PMW3610) bill of materials (BOM)

15 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PMW3610DM-SUDU
U1
1
XC6206P182MR
U2
1
C2764370
FPC 6P 0.5mm
J1
2
1u
C1, C2
1
C1678
3.3u X7R
C3
2
100N
100n
C4, C5
1
C14663
100n X7R
C6
2
C57112
10n X7R
C7, C9
1
C19702
10u X7R
C8
2
10K
10k
R1, R2
1
1k
R3

K0d3ball35 trackball sensor board (PMW3610) design files

The KiCad project lives in the konstantindenerz/k0d3ball35 repository on GitHub; these links point at the commit this page was built from.

K0d3ball35 trackball sensor board (PMW3610): common questions

How big is the K0d3ball35 trackball sensor board (PMW3610)?

The K0d3ball35 trackball sensor board (PMW3610) measures 26 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the K0d3ball35 trackball sensor board (PMW3610)?

15 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the K0d3ball35 trackball sensor board (PMW3610) design files?

From the konstantindenerz/k0d3ball35 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the K0d3ball35 trackball sensor board (PMW3610) design in my own project?

Yes, under the terms of its MIT license, which konstantindenerz chose for the repository.

More boards in k0d3ball35

Similar boards