STM32F373RCT6 - MSDB

koson·prototypes·stm32f373rct6_minimum_system_deelopment_board/kicad/F373RCT6_MSDB.kicad_pcb

STM32F373RCT6 - MSDB PCB layout, top view — open source STM32 board by koson

About the STM32F373RCT6 - MSDB PCB

STM32F373RCT6 - MSDB is an open source STM32 PCB design by koson, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 38 components from 20 distinct parts.

Its main chip is the STM32F373RCTx, from the STM32 family. Other key parts include the LM1117-3.3. By type, the board carries 19 capacitors, 5 connectors, 5 resistors, 2 ICs, 2 crystals and 2 switches.

Main components on the STM32F373RCT6 - MSDB

STM32F373RCT6 - MSDB bill of materials (BOM)

38 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F373RCTx
U1
1
LM1117-3.3
U2
1
8M
Y1
1
32768
Y2
1
Conn_02x04_Odd_Even
J1
1
Conn_02x06_Odd_Even
J2
3
Conn_02x12_Odd_Even
J3, J4, J5
1
SW_RESET
SW1
1
SW_F6
SW2
2
LED
D1, D2
1
10u
L1
5
10n
C1, C8, C10, C12, C17
2
22p
C2, C3
2
12p
C4, C5
5
1u
C6, C9, C11, C13, C18
4
100n
C7, C14, C15, C19
1
4,7u
C16
2
10K
R1, R2
1
0
R3
2
510
R4, R5

STM32F373RCT6 - MSDB design files

The KiCad project lives in the koson/prototypes repository on GitHub; these links point at the commit this page was built from.

STM32F373RCT6 - MSDB: common questions

What microcontroller does the STM32F373RCT6 - MSDB use?

The STM32F373RCT6 - MSDB is built around the STM32F373RCTx, from the STM32 family.

How big is the STM32F373RCT6 - MSDB PCB?

The STM32F373RCT6 - MSDB measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F373RCT6 - MSDB?

38 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32F373RCT6 - MSDB design files?

From the koson/prototypes repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the STM32F373RCT6 - MSDB design in my own project?

The repository has no license, so all rights stay with koson. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32F373RCT6 - MSDB without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in prototypes

Similar boards