Stm32f373rct6 evaluation board

koson·prototypes·stm32f373rct6_evaluation_board/kicad/stm32f373rct6_evaluation_board.kicad_pcb

Stm32f373rct6 evaluation board layout, top view — open source STM32 board by koson

About the Stm32f373rct6 evaluation board

Stm32f373rct6 evaluation board is an open source STM32 PCB design by koson, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 65 components from 32 distinct parts.

Its main chip is the STM32F373RCTx, from the STM32 family. Other key parts include the AP2127K-3.3, ST485EBDR, EL817 and M24C64-FDW. By type, the board carries 22 capacitors, 18 resistors, 7 ICs, 7 connectors, 6 diodes and 3 switches.

It belongs with the dev boards & breakouts designs in this gallery.

Main components on the Stm32f373rct6 evaluation board

Stm32f373rct6 evaluation board bill of materials (BOM)

65 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
AP2127K-3.3
U1, U2
1
ST485EBDR
U3
2
EL817
U4, U5
1
STM32F373RCTx
U6
1
M24C64-FDW
U7
1
8M
Y1
1
32768
Y2
1
RS485_connector
J1
1
Conn_02x03_Odd_Even
J2
1
Conn_01x08
J3
1
Conn_02x08_Odd_Even
J4
2
Conn_02x08_Odd_Even
J5, J6
1
Conn_02x04_Odd_Even
J7
2
SW
SW1, SW2
1
SW_RESET
SW3
5
LED
D3, D4, D5, D7, D8
1
STPS0530Z
D6
8
1u
C1, C2, C3, C4, C11, C14, C16, C18
3
100n
C5, C12, C22
4
10n
C6, C13, C15, C17
Show 12 more
QtyPartRefs
2
22p
C7, C8
2
12p
C9, C10
2
100n
C19, C20
1
4,7u
C21
1
0
R1
5
510
R2, R3, R4, R17, R18
2
4K7
R5, R6
1
120
R7
2
200
R8, R11
2
10K
R9, R10
2
10K
R12, R13
3
47K
R14, R15, R16

Stm32f373rct6 evaluation board design files

The KiCad project lives in the koson/prototypes repository on GitHub; these links point at the commit this page was built from.

Stm32f373rct6 evaluation board: common questions

What microcontroller does the Stm32f373rct6 evaluation board use?

The Stm32f373rct6 evaluation board is built around the STM32F373RCTx, from the STM32 family.

How big is the Stm32f373rct6 evaluation board?

The Stm32f373rct6 evaluation board measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32f373rct6 evaluation board?

65 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32f373rct6 evaluation board design files?

From the koson/prototypes repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Stm32f373rct6 evaluation board design in my own project?

The repository has no license, so all rights stay with koson. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32f373rct6 evaluation board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in prototypes

Similar boards