BmstuDataConv
Kreyl·BmstuDataConv·DataConv_hw/DataConv.kicad_pcb
About the BmstuDataConv PCB
BmstuDataConv is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 108 components from 37 distinct parts.
Its main chip is the STM32F405RX-64, from the STM32 family. Other key parts include the USBLC6. By type, the board carries 36 capacitors, 29 resistors, 12 diodes, 3 inductors, 2 switches and 1 IC.
Main components on the BmstuDataConv
BmstuDataConv bill of materials (BOM)
108 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6 | SOT23-6 | U1 |
| 1 | LED_5050 | LED_5050 | Q1 |
| 2 | MCP1700 | SOT23-3A | DA1, DA2 |
| 1 | MAX4453 | SOT23-8 | DA3 |
| 1 | STM32F405RX-64 | LQFP64 | DD1 |
| 1 | USB3300 | QFN-32_EP_5x5_Pitch0.5mm | DD2 |
| 1 | 74LVX4245MTCX | TSSOP24_169_P065 | DD3 |
| 4 | HOLE_METALLED | Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 2 | IT-1187 | BTN_4x4_SMD | SW1, SW2 |
| 2 | CONN_6 | PLS-6 | XL1, XL8 |
| 1 | USB_MICRO | USBmicro_MOLEX_1050170001 | XL2 |
| 1 | CONN_10 | PLS-10 | XL3 |
| 3 | CONN_1 | PLS-1Rnd | XL4, XL5, XL7 |
| 1 | CONN_3 | PLS-3 | XL6 |
| 2 | AudioJackSimple | AUDIO_CKX3_5_30 | XL9, XL10 |
| 1 | 12 MHz | 03225C4 | XTAL1 |
| 1 | 24MHz | 03225C4 | XTAL2 |
| 2 | BNC | BNC2 | XW1, XW2 |
| 10 | LED | LED_0603 | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 2 | PESD3V3 | SOD323 | D11, D12 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BLM18EG221SN1D | IND_0603 | L1, L3 |
| 1 | 90R | DLW21SN | L2 |
| 5 | 10u | CAP_0603 | C1, C25, C34, C35, C36 |
| 4 | 18pF | CAP_0603 | C2, C7, C32, C33 |
| 15 | 0.1u | CAP_0603 | C3, C5, C8, C10, C11, C16, C18, C20 +7 |
| 2 | 10n | CAP_0603 | C4, C13 |
| 5 | 1u | CAP_0603 | C6, C12, C17, C19, C24 |
| 1 | 2u2 | CAP_0603 | C9 |
| 2 | 2.2u | CAP_0603 | C14, C15 |
| 2 | 4.7u | CAP_0603 | C21, C23 |
| 2 | 1M | RES_0603 | R1, R19 |
| 6 | 10k | RES_0603 | R2, R5, R21, R27, R28, R29 |
| 1 | 2R0 | RES_0603 | R3 |
| 14 | 1k | RES_0603 | R4, R7, R8, R9, R10, R11, R12, R13 +6 |
| 2 | 100k | RES_0603 | R6, R22 |
| 1 | 12k | RES_0603 | R18 |
| 3 | 100R | RES_0603 | R23, R24, R25 |
BmstuDataConv design files
The KiCad project lives in the Kreyl/BmstuDataConv repository on GitHub; these links point at the commit this page was built from.
BmstuDataConv: common questions
What microcontroller does the BmstuDataConv use?
The BmstuDataConv is built around the STM32F405RX-64, from the STM32 family.
How big is the BmstuDataConv PCB?
The BmstuDataConv measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the BmstuDataConv?
108 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the BmstuDataConv design files?
From the Kreyl/BmstuDataConv repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the BmstuDataConv design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BmstuDataConv without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k