SimpleJoyRx
Kreyl·SimpleJoy·SimpleJoyRx_hw/SimpleJoyRx.kicad_pcb
About the SimpleJoyRx PCB
SimpleJoyRx is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 4-layer board measuring 24 × 97 mm, with 102 components from 39 distinct parts.
Its main chip is the STM32F072R8T6, from the STM32 family. By type, the board carries 41 capacitors, 11 resistors, 4 diodes, 3 switches, 2 inductors and 1 transistor.
SimpleJoyRx bill of materials (BOM)
102 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IRF9358 | SO8_150MIL | Q1 |
| 1 | ANT_PCB_MONO | ANT_868_24x30 | ANT1 |
| 1 | 0896BM15A0001E BALUN868JOHANSON | BALUN_JOHANSON868 | BLN1 |
| 3 | DRV8835DSSR DRV8835 | WSON12 | DA1, DA2, DA4 |
| 2 | MCP1700T-3302E/TT MCP1700 | SOT23-3A | DA3, DA7 |
| 1 | STM32F072R8T6 STM32F072RxTx | LQFP64 | DD1 |
| 1 | CC1101 | QFN20 | DD2 |
| 1 | FUSE0R Fuse0R | FuseShorted | F1 |
| 2 | HOLE_METALLED | Hole3d3_out5d5mm | HOLE1, HOLE2 |
| 4 | REFPOINT | REF_POINT_1MM | RP1, RP2, RP3, RP4 |
| 1 | DIPX8 DIPx8 | DIP_SMD_X8 | SW1 |
| 1 | IT-1187A | BTN_4x4_SMD | SW2 |
| 1 | SS-12F23 | SW_SS-12F23 | SW3 |
| 1 | TESTPOINT | TESTPOINT_1MM | TP1 |
| 1 | CONN_6 | PLS-6 | XL1 |
| 1 | 105017-0001 USB_MICRO | USBmicro_MOLEX_1050170001 | XL2 |
| 1 | CONN_2 | W02_Pitch_2d54 | XL3 |
| 7 | PLS2 | PLS-2 | XL4, XL5, XL6, XL7, XL8, XL17, XL22 |
| 10 | PLS3 | PLS-3 | XL9, XL10, XL11, XL12, XL13, XL15, XL16, XL19 +2 |
| 1 | CONN_4 | PLS-4 | XL14 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_1 | PLS-1Rnd | XL18 |
| 1 | 27MHZ 27MHz | 03225C4 | XTAL1 |
| 1 | L-C191KGCT | LED_0603 | D1 |
| 1 | L-C191LBCT | LED_0603 | D2 |
| 2 | PMEG2020EJ.115 PMEG2020 | SOD323 | D3, D4 |
| 1 | BLM15AG102SN1 | IND_0402 | L1 |
| 1 | 1.2NH 1.2nH | IND_0402 | L2 |
| 2 | 10N 10n | CAP_0603 | C1, C8 |
| 2 | 10U 10u | CAP_0603 | C2, C31 |
| 23 | 0.1U 0.1u | CAP_0603 | C3, C4, C5, C6, C7, C10, C11, C18 +15 |
| 2 | 1u | CAP_0603 | C9, C32 |
| 8 | CL31A107MQHNNNE 100u 6V3 | CAP_1206 | C12, C13, C14, C15, C16, C17, C23, C29 |
| 2 | 18PF 18pF | CAP_0603 | C26, C27 |
| 1 | 2.4PF 2.4pF | CAP_0402 | C35 |
| 1 | DoNotMount | CAP_0402 | C40 |
| 4 | 1k | RES_0603 | R1, R3, R4, R5 |
| 2 | 56K 56k | RES_0603 | R2, R8 |
| 3 | 100K 100k | RES_0603 | R6, R9, R10 |
| 2 | 10K 10k | RES_0603 | R11, R12 |
SimpleJoyRx design files
The KiCad project lives in the Kreyl/SimpleJoy repository on GitHub; these links point at the commit this page was built from.
SimpleJoyRx: common questions
What microcontroller does the SimpleJoyRx use?
The SimpleJoyRx is built around the STM32F072R8T6, from the STM32 family.
How big is the SimpleJoyRx PCB?
The SimpleJoyRx measures 24 × 97 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SimpleJoyRx?
102 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SimpleJoyRx design files?
From the Kreyl/SimpleJoy repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SimpleJoyRx design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SimpleJoyRx without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in SimpleJoy
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k