SimpleJoyTx
Kreyl·SimpleJoy·SimpleJoyTx_hw/SimpleJoyTx.kicad_pcb
About the SimpleJoyTx PCB
SimpleJoyTx is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 66 × 108 mm, with 86 components from 57 distinct parts.
Its main chip is the STM32F072R8T6, from the STM32 family. Other key parts include the USBLC6 and BT_HC05. By type, the board carries 26 capacitors, 13 resistors, 8 switches, 5 diodes, 4 inductors and 2 ICs.
Main components on the SimpleJoyTx
SimpleJoyTx bill of materials (BOM)
86 components, 57 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6 | SOT23-6 | U1 |
| 1 | BT_HC05 | BT_HC0x | U2 |
| 1 | IRF9358 2N7002 | SOT23-3 | Q1 |
| 2 | Joystick | Joystick | J1, J2 |
| 1 | ANT_PCB_MONO_2PIN | ANT_868_IFA_SIMPLEJOY | ANT1 |
| 1 | BAT | BATTERY_AAA_X3 | B1 |
| 1 | 0896BM15A0001E BALUN868JOHANSON | BALUN_JOHANSON868 | BLN1 |
| 1 | DRV8835DSSR MCP1700 | SOT23-3A | DA1 |
| 1 | STM32F072R8T6 STM32F072RxTx | LQFP64 | DD1 |
| 1 | CC1101 | QFN20 | DD2 |
| 8 | HOLE_METALLED | Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4, HOLE5, HOLE6, HOLE7, HOLE8 |
| 4 | REFPOINT | REF_POINT_1MM | RP1, RP2, RP3, RP4 |
| 1 | DIPX8 IT-1187A | BTN_4x4_SMD | SW1 |
| 1 | IT-1187A DIPx8 | DIP_SMD_X8 | SW2 |
| 1 | SS-12F23 SWITCH | SW_SS-12F23 | SW3 |
| 5 | IT-1187A | BTN_4x4_SMD | SW4, SW5, SW6, SW7, SW8 |
| 1 | TESTPOINT | TESTPOINT_1MM | TP1 |
| 1 | CONN_6 PBS-8 | PLS-8 | XL1 |
| 1 | 105017-0001 CONN_6 | PLS-6 | XL2 |
| 1 | CONN_2 USB_MINI_B | USBmicro_MOLEX_WM17142 | XL3 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PLS2 CONN_1 | PLS-1Rnd | XL4 |
| 1 | 27MHZ 12MHz | 0503x4-4 | XTAL1 |
| 1 | 27MHz | 03225C4 | XTAL2 |
| 1 | L-C191KGCT L-C191LBCT | LED_0603 | D1 |
| 1 | L-C191LBCT PMEG2020 | SOD323 | D2 |
| 1 | PMEG2020EJ.115 PMEG2020 | SOD323 | D3 |
| 1 | PMEG2020EJ.115 L-C191KGCT | LED_0603 | D4 |
| 1 | L-C191LBCT | LED_0603 | D5 |
| 1 | BLM15AG102SN1 BLM15AG102 | IND_0402 | L1 |
| 1 | 1.2NH BLM15AG102 | IND_0402 | L2 |
| 1 | BLM15AG102 | IND_0402 | L3 |
| 1 | 1.2nH | IND_0402 | L4 |
| 1 | 10N 10n | CAP_0603 | C1 |
| 1 | 10U 10u | CAP_0603 | C2 |
| 2 | 0.1U 18pF | CAP_0603 | C3, C4 |
| 9 | 0.1U 0.1u | CAP_0603 | C5, C6, C7, C18, C19, C21, C22, C24 +1 |
| 1 | 10N 0.1u | CAP_0603 | C8 |
| 1 | 0.1u | CAP_0603 | C9 |
| 1 | 0.1U 10n | CAP_0603 | C10 |
| 1 | 0.1U 1u | CAP_0603 | C11 |
| 3 | CL31A107MQHNNNE 0.1u | CAP_0603 | C12, C13, C16 |
| 2 | CL31A107MQHNNNE 18pF | CAP_0603 | C14, C15 |
| 1 | CL31A107MQHNNNE 1u | CAP_0603 | C17 |
| 1 | 0.1U 2pF | CAP_0402 | C20 |
| 1 | CL31A107MQHNNNE DoNotMount | CAP_0402 | C23 |
| 1 | 18PF 100pF | CAP_0402 | C26 |
| 1 | 51R | RES_0603 | R1 |
| 1 | 56K 1k | RES_0603 | R2 |
| 3 | 1k | RES_0603 | R3, R5, R13 |
| 1 | 56k | RES_0603 | R4 |
| 1 | 100K 10k | VAR_PTV09A-4 | R6 |
| 1 | 10k | VAR_PTV09A-4 | R7 |
| 1 | 56K 100k | RES_0603 | R8 |
| 1 | 100K 56k | RES_0603 | R9 |
| 1 | 100K 100k | RES_0603 | R10 |
| 1 | 10K 100k | RES_0603 | R11 |
| 1 | 10K 1k | RES_0603 | R12 |
SimpleJoyTx design files
The KiCad project lives in the Kreyl/SimpleJoy repository on GitHub; these links point at the commit this page was built from.
SimpleJoyTx: common questions
What microcontroller does the SimpleJoyTx use?
The SimpleJoyTx is built around the STM32F072R8T6, from the STM32 family.
How big is the SimpleJoyTx PCB?
The SimpleJoyTx measures 66 × 108 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SimpleJoyTx?
86 components, from 57 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SimpleJoyTx design files?
From the Kreyl/SimpleJoy repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SimpleJoyTx design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SimpleJoyTx without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in SimpleJoy
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k