Arm final
About the Arm final PCB
Arm final is an open source NXP PCB design by Krishnapriya1711, published on GitHub. It is a 2-layer board measuring 100 × 90 mm, with 34 components from 11 distinct parts.
Its main chip is the TEENSY 4.1, from the NXP family. By type, the board carries 28 connectors, 3 resistors, 1 IC, 1 transistor and 1 diode.
From the project
PCB design files
This repository contains the schematic and PCB design files for a plug-and-play microcontroller-based control board built around the Teensy 4.1, developed for robotic applications.
The design emphasizes modularity, flexibility, and ease of integration, allowing the same controller board to be reused across multiple robotic systems.
Main components on the Arm final
Arm final bill of materials (BOM)
34 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TEENSY 4.1 TEENSY_4.1 | TEENSY41 | IC1 |
| 1 | 2N3904 | TO-92L_Wide | Q1 |
| 4 | Conn_01x02_Pin | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1, J2, J3, J4 |
| 2 | Conn_01x03_Pin | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J5, J9 |
| 2 | Conn_01x04_Pin | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J6, J8 |
| 2 | Conn_01x06_Pin | JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J7, J11 |
| 18 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J12, J13, J14, J15, J16, J26, J27, J29 +10 |
| 1 | LED | LED_D3.0mm_Horizontal_O1.27mm_Z6.0mm | D1 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 270 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Arm final design files
The KiCad project lives in the Krishnapriya1711/pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutarm_final/arm_final.kicad_pcb
- Schematicarm_final/arm_final.kicad_sch
Arm final: common questions
What microcontroller does the Arm final use?
The Arm final is built around the TEENSY 4.1, from the NXP family.
How big is the Arm final PCB?
The Arm final measures 100 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arm final?
34 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arm final design files?
From the Krishnapriya1711/pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Arm final design in my own project?
The repository has no license, so all rights stay with Krishnapriya1711. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Arm final without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in pcb
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532