Board game timer
Krisss99·board-game-timer·board-game-timer_hardware/board-game-timer_hardware.kicad_pcb
About the Board game timer
Board game timer is an open source STM32 PCB design by Krisss99, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 45 × 50 mm, with 25 components from 19 distinct parts.
Its main chip is the STM32F030F4Px, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 10 capacitors, 5 connectors, 3 resistors, 2 ICs, 2 switches and 1 crystal.
From the project
Timer measures players' time taken in their turn.
Main components on the Board game timer
Board game timer bill of materials (BOM)
25 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F030F4Px | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J5 |
| 1 | SW_B0 | SW_PUSH_6mm | SW1 |
| 1 | SW_RST | SW_PUSH_6mm | SW2 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 1 | 4.7u | C_0805_2012Metric | C1 |
| 2 | 100n | C_0402_1005Metric | C2, C6 |
| 2 | 10p | C_0402_1005Metric | C3, C4 |
| 1 | 10n | C_0402_1005Metric | C5 |
| 2 | 22u | C_0805_2012Metric | C7, C8 |
| 2 | 1u | C_0805_2012Metric | C9, C10 |
| 2 | 10k | R_0402_1005Metric | R1, R2 |
| 1 | 1k5 | R_0402_1005Metric | R3 |
Board game timer design files
The KiCad project lives in the Krisss99/board-game-timer repository on GitHub; these links point at the commit this page was built from.
Board game timer: common questions
What microcontroller does the Board game timer use?
The Board game timer is built around the STM32F030F4Px, from the STM32 family.
How big is the Board game timer?
The Board game timer measures 45 × 50 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Board game timer?
25 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Board game timer design files?
From the Krisss99/board-game-timer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Board game timer design in my own project?
Yes, under the terms of its Apache-2.0 license, which Krisss99 chose for the repository.
Can I test firmware for the Board game timer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k