35 open source boards using the STM32F030F4Px

Real designs built with the STM32F030F4Px, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

35 boardsClear filters|Most starred

How designs wire the STM32F030F4Px

Read from the KiCad layouts of 31 open source designs, one per repository: what each pin of the STM32F030F4Px connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 23 of 31 designs, most often 100 nF (then 1 µF).
  • The NRST pin has a capacitor to GND on 17 of 31 designs, most often 100 nF.
  • The VDDA pin has a decoupling capacitor on 16 of 31 designs, most often 100 nF (then 1 µF).
  • The NRST pin has a pull-up to 3.3V on 15 of 31 designs, most often 10 kΩ (then 100 kΩ).
BOOT0pin 1Connected to: Signal 65% · GND 32%
  • Resistor to GND on 42% · 10 kΩ (6), 5.1 kΩ (2), 100 kΩ (2)
PF0pin 2Connected to: Signal 71% · not connected 26%
  • Capacitor to GND on 45% · 22 pF (5), 10 pF (4), 12 pF (1)
  • Crystal on 45% · 16 MHz (5), 8 MHz (3), 32 MHz (1)
PF1pin 3Connected to: Signal 71% · not connected 29%
  • Crystal on 35% · 8 MHz (3), 16 MHz (2), 32 MHz (1)
  • Capacitor to GND on 35% · 22 pF (5), 10 pF (2), 12 pF (1)
NRSTpin 4Connected to: A connector 48%
  • Capacitor to GND on 55% · 100 nF (17)
  • Pull-up to 3.3V on 48% · 10 kΩ (11), 100 kΩ (2), 4.7 kΩ (1)
VDDApin 5Connected to: 3.3V 94%
  • Decoupling capacitor on 52% · 100 nF (14), 1 µF (4), 10 nF (3)
PA1pin 7Connected to: Signal 87%
  • Series resistor on 35% · 10 kΩ (2), 330 Ω (2), 150 Ω (2)
PA7pin 13Connected to: Signal 87%
  • Series resistor on 39% · 10 kΩ (3), 22 Ω (2), 1 kΩ (2)
VSSpin 15Connected to: GND 97%
VDDpin 16Connected to: 3.3V 97%
  • Decoupling capacitor on 74% · 100 nF (24), 1 µF (3), 10 nF (2)
PA9pin 17Connected to: A connector 45%
  • Pull-up to 3.3V on 42% · 4.7 kΩ (5), 2.2 kΩ (3), 10 kΩ (3)
PA10pin 18Connected to: A connector 45% · not connected 16%
  • Pull-up to 3.3V on 42% · 4.7 kΩ (5), 2.2 kΩ (3), 10 kΩ (3)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ligra back by Jana-Marie, Jbc nano solder by Winkelkatze, Airspeed SensorBoard by pms67 and Rifle and sensors by DAlexis.

The STM32F030F4Px in open source designs

The gallery holds 35 open source boards using the STM32F030F4Px from 32 GitHub repositories; a typical one measures about 42.5 × 48 mm and carries around 38 components.

79% are two-layer designs, the rest use four layers or more, and 66% carry an open source license.

The most starred is Ligra back by Jana-Marie.

Microcontrollers on boards using the STM32F030F4Px

STM32F030F4Px: common questions

Where can I find a STM32F030F4Px reference design?

Each of the 35 boards on this page is a real design using the STM32F030F4Px. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F030F4Px VDD pin?

The VDD pin has a decoupling capacitor on 23 of 31 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 31 open source designs using the STM32F030F4Px.

How is the STM32F030F4Px NRST pin connected?

The NRST pin has a capacitor to GND on 17 of 31 designs, most often 100 nF. Counted from the KiCad layouts of 31 open source designs using the STM32F030F4Px.

What decoupling capacitors do designs use on the STM32F030F4Px VDDA pin?

The VDDA pin has a decoupling capacitor on 16 of 31 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 31 open source designs using the STM32F030F4Px.

What parts are used alongside the STM32F030F4Px?

The AMS1117-3.3, HT75XX-1-SOT89, NRF24L01_Breakout, AMS1117-5.0 and AP1117-33 appear in the most repositories here.

Which microcontrollers do boards using the STM32F030F4Px use?

Most are built on STM32 (34) and ESP32 (1).

How big is a typical board using the STM32F030F4Px?

The median is 42.5 × 48 mm, and 79% are two-layer designs.

What is the most popular open source board using the STM32F030F4Px?

By GitHub stars, Ligra back by Jana-Marie, with 215 stars.

Can I simulate one of these boards using the STM32F030F4Px before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part