Amp module
About the Amp module
Amp module is an open source PCB design by KyGuy2002, published on GitHub. It is a 2-layer board measuring 80 × 22 mm, with 22 components from 16 distinct parts.
Other key parts include the TPA3221DDVR. By type, the board carries 13 capacitors, 4 ICs, 3 resistors and 2 inductors.
From the project
PCB designs for projectdmx.us modular prop controller
Main components on the Amp module
Amp module bill of materials (BOM)
22 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | Vert Terminal Block p2 | U2 |
| 1 | ~ | 2p Output | U3 |
| 1 | TPA3221DDVR | TPA3221 | U5 |
| 1 | ~ | PSU Select Jumper | U6 |
| 2 | 7443331000 | 7443331000 | L1, L2 |
| 1 | 1000uf | 35YXJ1000M12.5X20 | C1 |
| 2 | 1uF CER 25v Samsung Electro-Mechanics | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C14 |
| 2 | 10uF CER 25v Samsung Electro-Mechanics | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 100nF Samsung Electro-Mechanics | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 4 | 33nF CER 50v Samsung Electro-Mechanics | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C11, C12, C13 |
| 1 | 1uf ECW Film | ECWFD2W105J | C8 |
| 1 | 1uf GMK316BJ105KL 100v | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 10uF Samsung Electro-Mechanics | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 3.3Ω UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 30kΩ UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
Amp module design files
The KiCad project lives in the KyGuy2002/ProjectDMX-PCB repository on GitHub; these links point at the commit this page was built from.
Amp module: common questions
How big is the Amp module?
The Amp module measures 80 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Amp module?
22 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Amp module design files?
From the KyGuy2002/ProjectDMX-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Amp module design in my own project?
The repository has no license, so all rights stay with KyGuy2002. Use it as a reference, and ask the author before reusing the design.
More boards in ProjectDMX-PCB
Rfid module
80 × 22 mm35 parts2LNo license0
RP2040/RP2350Controller1
160 × 113 mm31 parts2LNo license0
Fet module
80 × 22 mm19 parts2LNo license0
Relay module
80 × 22 mm17 parts2LNo license0
Pwm module
65 × 22 mm16 parts2LNo license0
Neo module
80 × 22 mm7 parts2LNo license0
Oled panel
52 × 38 mm5 parts2LNo license0