HardLabs

Controller1

KyGuy2002·ProjectDMX-PCB·controller/controller1.kicad_pcb

Controller1 PCB layout, top view — open source RP2040/RP2350 board by KyGuy2002

About the Controller1 PCB

Controller1 is an open source RP2040/RP2350 PCB design by KyGuy2002, published on GitHub. It is a 2-layer board measuring 160 × 113 mm, with 31 components from 22 distinct parts.

Its main chip is the Waveshare RP2350B, from the RP2040/RP2350 family. By type, the board carries 24 ICs, 4 switches and 3 connectors.

From the project

PCB designs for projectdmx.us modular prop controller

Controller1 bill of materials (BOM)

31 components, 22 distinct parts.

QtyPartRefs
1
~
U1
1
~
U2
1
~
U4
1
~
U5
4
~
U6, U7, U13, U14
1
~
U8
1
~
U9
1
~
U10
1
~
U11
1
~
U12
6
~
U15, U17, U18, U19, U20, U21
1
~
U16
1
~
U26
2
~
U27, U28
1
~
U29
1
Female XLR Out
J2
1
Male XLR In
J3
1
SJ-3523-SMT
J4
1
UP
S1
1
DOWN
S2
Show 2 more
QtyPartRefs
1
ENTER
S3
1
MENU
S5

Controller1 design files

The KiCad project lives in the KyGuy2002/ProjectDMX-PCB repository on GitHub; these links point at the commit this page was built from.

Controller1: common questions

What microcontroller does the Controller1 use?

The Controller1 is built around the Waveshare RP2350B, from the RP2040/RP2350 family.

How big is the Controller1 PCB?

The Controller1 measures 160 × 113 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Controller1?

31 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Controller1 design files?

From the KyGuy2002/ProjectDMX-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Controller1 design in my own project?

The repository has no license, so all rights stay with KyGuy2002. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Controller1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in ProjectDMX-PCB

Similar boards