KiCad-Model-1-ATmega328P-Blink-Board
About the KiCad-Model-1-ATmega328P-Blink-Board
KiCad-Model-1-ATmega328P-Blink-Board is an open source AVR/Arduino PCB design by kyvrit05, published on GitHub. It is a 4-layer board measuring 78 × 49 mm, with 14 components from 9 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the MAX30102 and SSD1306. By type, the board carries 4 resistors, 3 switches, 3 capacitors, 2 ICs, 1 module and 1 diode.
From the project
A simple PCB design - Project 1
As part of strengthening my fundamentals in PCB design and modelling, I started with a simple introductory project: designing a PCB that allows an LED to blink. Reference Guide from https://www.youtube.com/@HTMWorkshop
The project focuses on understanding the basic PCB design workflow, including schematic creation, component selection, circuit layout, routing, and preparing the board for fabrication. Although the circuit itself is simple, it provides a practical foundation for developing essential PCB design skills and understanding how electronic components are translated from a schematic…
Main components on the KiCad-Model-1-ATmega328P-Blink-Board
KiCad-Model-1-ATmega328P-Blink-Board bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX30102 | MAX30102_MODULE | U1 |
| 1 | SSD1306 | SSD1306 | U2 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | DOWN | SW_PUSH_6mm | SW1 |
| 1 | UP | SW_PUSH_6mm | SW2 |
| 1 | MENU | SW_PUSH_6mm | SW3 |
| 1 | ALARM | LED_D5.0mm | D1 |
| 3 | 100n | C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 4 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
KiCad-Model-1-ATmega328P-Blink-Board design files
The KiCad project lives in the kyvrit05/KiCad-Model-1-ATmega328P-Blink-Board repository on GitHub; these links point at the commit this page was built from.
KiCad-Model-1-ATmega328P-Blink-Board: common questions
What microcontroller does the KiCad-Model-1-ATmega328P-Blink-Board use?
The KiCad-Model-1-ATmega328P-Blink-Board is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the KiCad-Model-1-ATmega328P-Blink-Board?
The KiCad-Model-1-ATmega328P-Blink-Board measures 78 × 49 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the KiCad-Model-1-ATmega328P-Blink-Board?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the KiCad-Model-1-ATmega328P-Blink-Board design files?
From the kyvrit05/KiCad-Model-1-ATmega328P-Blink-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the KiCad-Model-1-ATmega328P-Blink-Board design in my own project?
The repository has no license, so all rights stay with kyvrit05. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the KiCad-Model-1-ATmega328P-Blink-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k