69 open source boards using the SSD1306
Real designs built with the SSD1306, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398STM32
Explorer
anyshake
100 × 100 mm244 parts2LCustom license98- schematic only · 37 partsRP2040/RP2350
Boardsmith
ForestHubAI
37 partsAGPL-3.037 RP2040/RP2350
MMM main
niektb
40 × 110 mm145 parts4LCC-BY-SA-4.034ESP32
Main board
card-io-ecg
85 × 55 mm51 parts4LNo license22PIC
QI Charger
drewsum
150 × 50 mm293 parts2LNo license20AVR/Arduino
Keyboard
dragonlock2
200 × 100 mm225 parts2LApache-2.013AVR/Arduino
PulseOximeter
Choaib-ELMADI
82 × 55 mm10 parts4LNo license9ESP32
Ultisense
darshg321
44.7 × 93.6 mm83 parts2LNo license3McDapBots KiCad TIMSPM0
DavidMe03
128.3 × 158.1 mm79 parts2LNo license3ESP32
Lumenlab
ericmcdaniel
99.9 × 80 mm72 parts4LMIT3AVR/Arduino
Pcb Project
ODARI-CHARLES1
75.1 × 50.1 mm14 parts2LNo license2ESP32
ESP32 sprinkler timer
rgodin974
135.3 × 211.3 mm99 parts2LNo license1STM32
Micromouse v2
minindupasan
100 × 130 mm74 parts2LNo license1AVR/Arduino
Macro pad
jonathanwpaul
108 × 122 mm58 parts2LNo license1STM32
Scl3300-d01-evb
anyshake
65 × 40 mm58 parts2LNo license1ESP32
Environment-Monitor
Dynix7
59.5 × 40 mm49 parts2LMIT1ESP32
Esp32-loradv transceiver
alonsoo-rodriguez
40 × 95.3 mm30 parts2LNo license1- schematic only · 41 partsSTM32
UVExpose
uxabix
41 partsMIT1 NXP
Afx-01 hardware
cosmikwolf
91.4 × 116.8 mm105 parts2LNo license0AVR/Arduino
PORTABLE-ECG
jeis-aj
64.8 × 25.5 mm80 parts2LMIT0ESP8266
ESP8266-Cherry-MX-Board
hampussandberg
33 × 90 mm59 parts2LNo license0Nordic nRF
EBoard remote control
kattemjau
34 × 100 mm57 partsMIT0AVR/Arduino
Pika-Board-Files
FrenzyExists
85.7 × 118.3 mm55 parts2LNo license0RP2040/RP2350
Hyperactive radio
activexray
88 × 60 mm52 parts4LNo license0Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0Robotics System Learning Kit
Joshua-Koshy
128.3 × 129.5 mm49 parts2LNo license0TangNano20K-BaseBoard
michalgluszak
100 × 90 mm49 parts2LNo license0Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0PIC
Asm pong
tecknet-gg
98.3 × 95.3 mm47 parts2LMIT0STM32
USBPDSolderingIron
keionbis
70 × 13.5 mm40 parts2LNo license0ESP32
Smart-IoT-Sensor-Node
harshilgohil989-design
83.3 × 69 mm34 parts2LNo license0ESP32
OPAmp
Siddarth-Kota
83 × 90.2 mm30 parts2LNo license0ESP8266
Iaq board
Tonio5978
70.1 × 43.2 mm17 parts2LNo license0
How designs wire the SSD1306
Read from the KiCad layouts of 59 open source designs, one per repository: what each pin of the SSD1306 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 73% · a signal 16% | — |
| VCCpin 2 | Connected to: 3.3V 63% · a signal 34% | — |
| SCLpin 3 | Connected to: The microcontroller 41%, a connector 25% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iaq board by nkitanov, Explorer by anyshake, Cardecg by peterisza and MMM main by niektb.
The SSD1306 in open source designs
The gallery holds 69 open source boards using the SSD1306 from 63 GitHub repositories; a typical one measures about 82.5 × 76.2 mm and carries around 37 components.
82% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.
The most starred is Iaq board by nkitanov.
Parts used alongside the SSD1306
Microcontrollers on boards using the SSD1306
What boards using the SSD1306 are built for
SSD1306: common questions
Where can I find a SSD1306 reference design?
Each of the 69 boards on this page is a real design using the SSD1306. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SSD1306?
The Arduino_Nano_v3.x, MAX30102, AMS1117-3.3, DRV8847PWPR and LM2937IMP-3.3/NOPB appear in the most repositories here.
Which microcontrollers do boards using the SSD1306 use?
Most are built on AVR/Arduino (20), ESP32 (13), RP2040/RP2350 (6) and STM32 (5).
How big is a typical board using the SSD1306?
The median is 82.5 × 76.2 mm, and 82% are two-layer designs.
What is the most popular open source board using the SSD1306?
By GitHub stars, Iaq board by nkitanov, with 398 stars.
Can I simulate one of these boards using the SSD1306 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.