Bc28 module board
About the Bc28 module board
Bc28 module board is an open source PCB design by LanternD, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 40 × 40 mm, with 10 components from 8 distinct parts.
Other key parts include the BC28. By type, the board carries 3 connectors, 3 capacitors, 2 resistors, 1 IC and 1 switch.
It belongs with the iot & wireless designs in this gallery.
From the project
Hardware and software design for NB-Scope.
- The majority of the modules here can be soldered by hand, except Quectel BG96 and uBlox SARA-R410M-02B. - If you solder the SARA-R410M-02B by yourself (customizing the stencil and applying the solder paste), instead of using the SMT service, you need to shrink the size of all the pads of the SARA-R410M-02B footprint! Otherwise they are likely to get short-circuited. - Before
Main components on the Bc28 module board
Bc28 module board bill of materials (BOM)
10 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC28 | Quectel_BC28 | U1 |
| 1 | 1865 | SMA_Antenna | J1 |
| 1 | Left_Conn | PinHeader_1x22_P1.27mm_Vertical | J2 |
| 1 | Right_Conn | PinHeader_1x22_P1.27mm_Vertical | J3 |
| 1 | SW_Push | SW_SPST_FSMSM | SW1 |
| 3 | 100nF | C_0603_1608Metric | C1, C2, C3 |
| 1 | 0 | R_0603_1608Metric | R1 |
| 1 | 10k | R_0603_1608Metric | R2 |
Bc28 module board design files
The KiCad project lives in the LanternD/NB-Scope repository on GitHub; these links point at the commit this page was built from.
Bc28 module board: common questions
How big is the Bc28 module board?
The Bc28 module board measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bc28 module board?
10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bc28 module board design files?
From the LanternD/NB-Scope repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Bc28 module board design in my own project?
Yes, under the terms of its Apache-2.0 license, which LanternD chose for the repository.
More boards in NB-Scope
STM32Node base
78 × 40 mm73 parts2LApache-2.06
Sara r410m 02b module board
40 × 40 mm25 parts2LApache-2.06
Bg96 module board
40 × 40 mm21 parts2LApache-2.06
Me3616 module board
40 × 40 mm21 parts2LApache-2.06
Module benchmark extension board
45 × 50 mm17 parts2LApache-2.06
Bc26 module board
40 × 40 mm14 parts2LApache-2.06
Current calibration board
40 × 40 mm14 parts2LApache-2.06
Bc26 bc66 module board
40 × 40 mm14 parts2LApache-2.06
Bc95 bc35 module board
40 × 40 mm10 parts2LApache-2.06
Firmware upgrade extension board
45 × 50 mm9 parts2LApache-2.06
Pwr key addon
11.4 × 10.9 mm6 parts2LApache-2.06
Similar boards
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
Connecting piece
66.4 × 24.5 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm7 parts2LCC-BY-SA-4.0446
EEZ DIB B3C
eez-open
110 × 90 mm30 parts2LTAPR-OHL-1.0391
EEZ DIB AUX-PS
230.5 × 60 mm63 parts2LTAPR-OHL-1.0391