Hot-Plate
lekangji·PCB-Hot-Plate·pcb/controller/project/Hot-Plate.kicad_pcb
About the Hot-Plate PCB
Hot-Plate is an open source PCB design by lekangji, published on GitHub under the MIT license. It is a 2-layer board measuring 91 × 65 mm, with 49 components from 30 distinct parts.
Other key parts include the MIC4426, HM8342S, TLV9002IDR and CH224A. By type, the board carries 16 resistors, 11 capacitors, 5 connectors, 5 diodes, 4 ICs and 4 switches.
From the project
A 140W universal USB-C powered PCB Hot Plate!
A 140W USB-C-powered PCB hot plate for precise heating, such as for solder reflow. It uses a USB-C power input for accessibility and uses an aluminium PCB heating element driven a switching MOSFET, along with thermistors to monitor temperature, USB-C negotiation, and real-time current/voltage monitoring.
My motivation for this project was to create a low-cost, customizable, fully controllable PCB hotplate for electronics work, like soldering or heating stuff up. I thought that other hotplates online were very expensive and lacked the power I wanted. By designing a custom solution, I made a…

Main components on the Hot-Plate
Hot-Plate bill of materials (BOM)
49 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIC4426 | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | HM8342S GATEMODE(捷茂微) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-1 | U4 |
| 1 | TLV9002IDR TI(德州仪器) | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U5 |
| 1 | CH224A WCH(南京沁恒) | ESSOP-10_L4.9-W3.9-P1.0-LS6.0-TL-EP | U6 |
| 1 | XR10N04S XNRUSEMI(新锐) | SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | Q3 |
| 1 | XR25P04F XNRUSEMI(新锐) | PDFN-8_L5.8-W5.0-P1.27-LS6.1-BL | Q4 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 2 | CONN_01X20 Conn_01x20 | PinSocket_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | CONN_01X08 Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 4 | TS-1095PS-A1B2-C3D2 | KEY-SMD_4P-L6.0-W6.0-P3.90-LS9.0 | SW1, SW2, SW3, SW4 |
| 1 | SS34 | D_SMA_Handsoldering | D1 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D6 |
| 1 | BZT52C15 | D_SOD-123 | D5 |
| 1 | GDNR6045-6R8MTF | L_6.3x6.3_H3 | L1 |
| 1 | XR1365-220M | IND-SMD_L13.5-W12.6_YSPI1335T-1R0M | L2 |
| 3 | 22UF 22uF | CP_Elec_5x5.4 | C1, C2, C5 |
| 2 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C9 |
| 5 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6, C7, C8, C13 |
| 1 | 100UF 100uF | CP_Elec_6.3x7.7 | C10 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R12 |
| 1 | 82K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 3 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R7, R13 |
| 2 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R14 |
| 1 | 56K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 2 | 50K 49.9K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R11 |
| 1 | 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 10 mΩ | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17 |
| 1 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 210K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
Hot-Plate design files
The KiCad project lives in the lekangji/PCB-Hot-Plate repository on GitHub; these links point at the commit this page was built from.
Hot-Plate: common questions
How big is the Hot-Plate PCB?
The Hot-Plate measures 91 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hot-Plate?
49 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hot-Plate design files?
From the lekangji/PCB-Hot-Plate repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hot-Plate design in my own project?
Yes, under the terms of its MIT license, which lekangji chose for the repository.