Net weaver
leomcelroy·net-weaver·public/generated.net
About the Net weaver PCB
Net weaver is an open source PCB design by leomcelroy, published on GitHub. It is a board, with 29 components from 8 distinct parts.
It belongs with the iot & wireless, displays & leds and sensors designs in this gallery.
From the project
Build circuits like legos!
NetWeaver is a web-based tool for generating circuit schematics (and layouts) using libraries of components and sub-circuits.
It is built on top of Polymorphic Blocks for creating netlists and SVG-PCB for describing board layouts.
In NetWeaver instead of having to specify which physical pins of components are connected to each other you can connect ports which represent high level electrical interfaces (digital GPIO, I2C bundle, etc...). You can think of NetWeaver as embedding information you would typically have to find by digging through a datasheet into part descriptions.
Net weaver bill of materials (BOM)
29 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ±1% 1/10W Thick Film Resistors 75V ±100ppm/℃ -55℃~+155℃ 5.1kΩ 0603 Chip Resistor - Surface Mount ROHS | R_0603_1608Metric | _QGZd05Ri.cc_pull.cc1, _QGZd05Ri.cc_pull.cc2 |
| 1 | COM-15111 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | _QGZd05Ri.conn |
| 9 | 50V 100nF X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C_0603_1608Metric | _UJOuhuHr.dvdd_cap[0], _UJOuhuHr.dvdd_cap[1], _UJOuhuHr.iovdd_cap[0], _UJOuhuHr.iovdd_cap[1], _UJOuhuHr.iovdd_cap[2], _UJOuhuHr.iovdd_cap[3], _UJOuhuHr.iovdd_cap[4], _UJOuhuHr.iovdd_cap[5] +1 |
| 1 | LDL1117S33R | SOT-223-3_TabPin2 | _n3w58oKp.ic |
| 1 | 25V 4.7uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C_0805_2012Metric | _n3w58oKp.out_cap |
| 6 | 40V 550mV@1A 1A SMA(DO-214AC) Schottky Barrier Diodes (SBD) ROHS | D_SMA | _xQhDBnLi.d[0,0], _xQhDBnLi.d[0,1], _xQhDBnLi.d[0,2], _xQhDBnLi.d[1,0], _xQhDBnLi.d[1,1], _xQhDBnLi.d[1,2] |
| 6 | 5.1mm switch | SW_SPST_SKQG_WithoutStem | _xQhDBnLi.sw[0,0], _xQhDBnLi.sw[0,1], _xQhDBnLi.sw[0,2], _xQhDBnLi.sw[1,0], _xQhDBnLi.sw[1,1], _xQhDBnLi.sw[1,2] |
| 3 | — | JlcToolingHole_1.152mm | jlc_th.th1, jlc_th.th2, jlc_th.th3 |
Net weaver design files
The KiCad project lives in the leomcelroy/net-weaver repository on GitHub; these links point at the commit this page was built from.
- Netlistpublic/generated.net
Net weaver: common questions
How many components are on the Net weaver?
29 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Net weaver design files?
From the leomcelroy/net-weaver repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Net weaver design in my own project?
The repository has no license, so all rights stay with leomcelroy. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k